TU Dresden    
English | Suche 
TU Dresden » Fakultät Mathematik und Naturwissenschaften » Fachrichtung Chemie und Lebensmittelchemie » AC1
Prof. Dr. rer. nat. habil. Stefan Kaskel

Publikationen

    Zeitschriftenbeiträge          Buchbeiträge         


 

Zeitschriftenbeiträge 

     

    2016

  • Biemelt, T., Wegner, K.; Teichert, J.; Lohe, M. R.; Martin, J.; Grothe, J.; Kaskel, S.: “Hopcalite Nanoparticle Catalysts with High Water Vapour Stability for Catalytic Oxidation of Carbon Monoxide”, Appl. Catal., B (2016), 184, 208-215.

  • Bon, V., Kavoosi, N.; Senkovska, I.; Mueller, P.; Schaber, J.; Wallacher, D.; Toebbens, D. M.; Mueller, U.; Kaskel, S.: “Tuning the Flexibility in MOFs by SBU Functionalization”, Dalton Trans. (2016), 45(10), 4407-4415.

  • Borchardt, L.; Oschatz, M.; Kaskel, S.: “Carbon Materials for Lithium Sulfur Batteries – Ten Critical Questions”, Chem. – Eur. J. (2016), 22(22), 7324-7351.

  • Drache, F.; Bon, V.; Senkovska, I.; Adam, M.; Eychmueller, A.; Kaskel, S.: “Vapochromic Luminescence of a Zirconium-Based Metal-Organic Framework for Sensing Applications”, Eur. J. Inorg. Chem. (2016), DOI: 10.1002/ejic.201600261.

  • Drache, F.; Bon, V.; Senkovska, I.; Marschelke, C.; Synytska, A.; Kaskel, S.: “Postsynthetic Inner-Surface Functionalization of the Highly Stable Zirconium-Based Metal-Organic Framework DUT-67”, Inorg. Chem. (2016), 55(15), 7206-7213.

  • Eckhardt, K.; Bon, V.; Getzschmann, J.; Grothe, J.; Wisser, F. M.; Kaskel, S.: “Crystallographic Insights into (CH3NH3)3(Bi2I9): A New Lead-Free Hybrid Organic-Inorganic Material as a Potential Absorber for Photovoltaics”, Chem. Commun. (Cambridge, U. K.) (2016), 52(14), 3058-3060.

  • Haubold, D.; Reichhelm, A.; Weiz, A.; Borchardt, L.; Ziegler, C.; Bahrig, L.; Kaskel, S.; Ruck, M.; Eychmueller, A.: “The Formation and Morphology of Nanoparticle Supracrystals”, Adv. Funct. Mater. (2016), 26(27), 4890-4895.

  • Hippauf, F.; Huettner, C.; Lunow, D.; Borchardt, L.; Henle, T.; Kaskel, S.: “Towards a continuous adsorption process for the enrichment of ACE-inhibiting peptides from food protein hydrolysates”, Carbon (2016), 107, 116-123.

  • Kohl, M.; Borrmann, F.; Althues, H.; Kaskel, S.: “Hard Carbon Anodes and Novel Electrolytes for Long-Cycle-Life Room Temperature Sodium-Sulfur Full Cell Batteries”, Adv. Energy Mater. (2016), 6(6), n/a.

  • Krause, A.; Doerfler, S.; Piwko, M.; Wisser, F. M.; Jaumann, T.; Ahrens, E.; Giebeler, L.; Althues, H.; Schaedlich, S.; Grothe, J.; Jeffery, A.; Grube, M.; Brueckner, J.; Martin, J.; Eckert, J.; Kaskel, S.; Mikolajick, T.; Weber, W. M.: “High Area Capacity Lithium-Sulfur Full-cell Battery with Prelitiathed Silicon Nanowire-Carbon Anodes for Long Cycling Stability”, Sci. Rep. (2016), 6, 27982.

  • Krause, S., Bon, V.; Senkovska, I.; Stoeck, U.; Wallacher, D.; Toebbens, D. M.; Zander, S.; Pillai, R. S.; Maurin, G.; Coudert, F.-X.; Kaskel, S.: “A Pressure-Amplifying Framework Material with Negative Gas Adsorption Transitions”, Nature (2016), 532(7599) 348-352.

  • Kutzscher, C., Nickerl, G.; Senkovska, I.; Bon, V,; Kaskel, S.: “Proline Functionalized UiO-67 and UiO-68 Type Metal-Organic Frameworks Showing Reversed Diastereoselectivity in Aldol Addition Reactions”, Chem. Mater. (2016), 28(8), 2573-2580.

  • Mendt, M.; Gutt, F.; Kavoosi, N.; Bon, V.; Senkovska, I.; Kaskel, S.; Poeppel, A.: “EPR Insights into Switchable and Rigid Derivates of the Metal-Organic Framework DUT-8(Ni) by NO Adsorption”, J. Phys. Chem. C (2016), 120(26), 14246-14259.

  • Oschatz, M.; Pre, P.; Doerfler, S.; Nickel, W.; Beaunier, P.; Rouzaud, J.-N.; Fischer, C.; Brunner, E.; Kaskel, S.: “Nanostructure characterization of carbide-derived carbons by morphological analysis of transmission electron microscopy images combined with physisorption and Raman spectroscopy”, Carbon (2016), 105, 314-322.

  • Pawlitzek, F.; Pampel, J.; Schmuck, M.; Althues, H.; Schumm, B.; Kaskel, S.: “High-power lithium ion batteries based on preorganized necklace type Li4Ti5O12/VACNT nano-composites”, J. Power Sources (2016), 325, 1-6.

  • Polyzoidis, A., Altenburg, T.; Schwarzer, M.; Loebbecke, S.; Kaskel, S.: “Continuous Microreactor Synthesis of ZIF-8 with High Space-Time-Yield and Tunable Particle Size”, Chem. Eng. J. (Amsterdam, Neth.) (2016), 283,971-977.

  • Roztocki, K.; Senkovska, I.; Kaskel, S.; Matoga, D.: “Carboxylate-Hydrazone Mixed-Linker Metal-Organic Frameworks: Synthesis, Structure, and Selective Gas Adsorption”, Eur. J. Inorg. Chem. (2016), DOI: 10.1002/ejic.201600134.

  • Strubel, P.; Althues, H.; Kaskel, S.: “Solution-Based Chemical Process for Synthesis of Highly Active Li2S/Carbon Nanocomposite for Lithium-Sulfur Batteries”, ChemNanoMat (2016), 2(7), 656-659.

  • Strubel, P.; Althues, H.; Kaskel, S.: “Zinc-salt templating of hierarchical porous carbons for low electrolyte high energy lithium-sulfur batteries (LE-LiS)”, Carbon (2016), 107, 705-710.

  • Sun, X.; Hao, G.-P.; Lu, X.; Xi, L.; Liu, B.; Si, W.; Ma, C.; Liu, Q.; Zhang, Q.; Kaskel, S.; Schmidt, O. G.: “High-defect hydrophilic carbon cuboids anchored with Co/CoO nanoparticles as highly efficient and ultra-stable lithium-ion battery anodes”, J. Mater. Chem. A (2016), 4(26), 10166-10173.

  • Wen, D.; Liu, W.; Haubold, D.; Zhu, C.; Oschatz, M.; Holzschuh, M.; Wolf, A.; Simon, F.; Kaskel, S.; Eychmueller, A.: “Gold Aerogels: Three-Dimensional Assembly of Nanoparticles and Their Use as Electrocatalytic Interfaces”, ACS Nano (2016), 10(2), 2559-2567.

  • Wisser, F. M.; Grothe, J.; Kaskel, S.: “Nanoporous Polymers as Highly Sensitive Functional Material in Chemiresistive Gas Sensors”, Sens. Actuators, B (2016), 223, 166-171.

  • Zera, E.; Nickel, W.; Hao, G.-P.; Vanzetti, L.; Kaskel, S.; Soraru, G. D.: “Nitrogen Doped Carbide Derived Carbon Aerogels by Chlorine Etching of a SiCN Aerogel”, J. Mater. Chem. A (2016), 4(12), 4525-4533.

  • Zera, E.; Nickel, W.; Kaskel, S.; Soraru, G. D.: “Out-of-Furnace Oxidation of SiCN Polymer-Derived Ceramic Aerogel Pyrolized at Intermediate Temperature (600-800 °C)”, J. Eur. Ceram. Soc. (2016), 36(3), 423-428.

  • Ziegler, C.; Klosz, S.; Borchardt, L.; Oschatz, M.; Kaskel, S.; Friedrich, M.; Kriegel, R.; Keilhauer, T.; Armbruester, M.; Eychmueller, A.: “ZnPd/ZnO Aerogels as Potential Catalytic Materials”, Adv. Funct. Mater. (2016), 26(7), 1014-1020.

  • 2015

  • Abendroth, T.; Althues, H.; Maeder, G.; Haertel, P.; Kaskel, S.; Beyer, E.: “Selective absorption of Carbon Nanotube thin films for solar energy applications”, Sol. Energy Mater. Sol. Cells (2015), 143, 553-556.

  • Abendroth, T.; Liebich, J.; Haertel, P.; Schumm, B.; Althues, H.; Kaskel, S.; Beyer, E.: “Transparente und leitfähige Veredelung von Kunststoffoberflächen, Antistatische und elektrooptische Anwendungen”, Vak. Forsch. Prax. (2015), 27(3), 36-40.

  • Adam, M.; Oschatz, M.; Nickel, W.; Kaskel, S.: “Preparation of hierarchical porous biomorphic carbide-derived carbon by polycarbosilane impregnation of wood”, Microporous Mesoporous Mater. (2015), 210, 26-31.

  • Adam, M.; Strubel, P.; Borchardt, L.; Althues, H.; Doerfler, S.; Kaskel, S.: “Trimodal hierarchical carbide-derived carbon monoliths from steam- and CO2-activated wood templates for high rate lithium sulfur batteries”, J. Mater. Chem. A (2015), 3(47), 24103-24111.

  • Biemelt, T.; Wegner, K.; Teichert, J.; Kaskel, S.: “Microemulsion flame pyrolysis for hopcalite nanoparticle synthesis: a new concept for catalyst preparation”, Chem. Commun. (Cambridge, U. K.) (2015), 51(27), 5872-5875.

  • Bon, V.; Kavoosi, N.; Senkovska, I.; Kaskel, S.: “Tolerance of Flexible MOFs toward Repeated Adsorption Stress”, ACS Appl. Mater.Interfaces (2015), 7(40), 22292-22300.

  • Bon, V.; Klein, N.; Senkovska, I.; Heerwig, A.; Getzschmann, J.; Wallacher, D.; Zizak, I.; Brzhezinskaya, M.; Mueller, U.; Kaskel, S.: “Exceptional adsorption-induced cluster and network deformation in the flexible metal-organic framework DUT-8(Ni) observed by in situ X-ray diffraction and EXAFS”, Phys. Chem. Chem. Phys. (2015), 17(26), 17471-17479.

  • Bon, V.; Pallmann, J.; Eisbein, E.; Hoffmann, H. C.; Senkovska, I.; Schwedler, I.; Schneemann, A.; Henke, S.; Wallacher, D.; Fischer, R. A.; Seifert, G.; Brunner, E.; Kaskel, S.: “Characteristics of flexibility in metal-organic framework solid solutions of composition [Zn2(BME-bdc)x(DB-bdc)2-xdabco]n: In situ powder X-ray diffraction, in situ NMR spectroscopy, and molecular dynamics simulations”, Microporous Mesoporous Mater. (2015), 216, 64-74.

  • Chen, Y.; Ma, R.; Zhou, Z.; Liu, G.; Zhou, Y.; Liu, Q.; Kaskel, S.; Wang, J.: “An In Situ Source-Template-Interface Reaction Route to 3D Nitrogen-Doped Hierarchical Porous Carbon as Oxygen Reduction Electrocatalyst”, Adv. Mater. Interfaces (2015), 2(11), 1500199/1-1500199/7.

  • Dueren, T.; Kaskel, S.; Llewellyn, P.; Silvestre-Albero, J.: “Special issue “10th International Symposium on the Characterization of Porous Solids - Preface”, Microporous Mesoporous Mater. (2015), 209, 1.

  • Erbe, M.; Haenisch, J.; Huehne, R.; Freudenberg, T.; Kirchner, A.; Molina-Luna, L.; Damm, C.; Van Tendeloo, G.; Kaskel, S.; Schultz, L.; Holzapfel, B.: “BaHfO3 artificial pinning centres in TFA-MOD-derived YBCO and GdBCO thin films”, Supercond. Sci.Technol. (2015), 28(11), 1-13.

  • Fischer, R.; Kaskel, S.; Kitagawa, S.: “Special issue: New generations of porous metal-organic frameworks”, Microporous Mesoporous Mater. (2015), 216, 1.

  • Haag, J.; Mertens, T.; Kolb, M.; Kotte, L.; Kaskel, S.: “Plasma enhanced chemical vapour deposition (PECVD) at atmospheric pressure (AP) of organosilicon films for adhesion promotion on Ti15V3Cr3Sn3Al and Ti6Al4V”, J. Mater. Sci. Eng. A (2015), 5(7-8), 274-284.

  • Hao, G.-P.; Mondin, G.; Zheng, Z.; Biemelt, T.; Klosz, S.; Schubel, R.; Eychmueller, A.; Kaskel, S.: “Unusual Ultra-Hydrophilic, Porous Carbon Cuboids for Atmospheric-Water Capture”, Angew. Chem., Int. Ed. (2015), 54(6), 1941-1945.

  • Hao, G.-P.; Sahraie, N. R.; Zhang, Q.; Krause, S.; Oschatz, M.; Bachmatiuk, A.; Strasser, P.; Kaskel, S.: “Hydrophilic non-precious metal nitrogen-doped carbon electrocatalysts for enhanced efficiency in oxygen reduction reaction”, Chem. Commun. (Cambridge, U. K.) (2015), 51(97), 17285-17288.

  • Helten, S.; Sahoo, B.; Bon, V.; Senkovska, I.; Kaskel, S.; Glorius, F.: “Copolymerisation at work: the first example of a highly porous MOF comprising a triarylborane-based linker”, CrystEngComm (2015), 17(2), 307-312.

  • Helten, S.; Sahoo, B.; Mueller, P.; Janssen-Mueller, D.; Klein, N.; Gruenker, R.; Bon, V.; Glorius, F.; Kaskel, S.; Senkovska, I.: “Functional group tolerance in BTB-based metal-organic frameworks (BTB - benzene-1,3,5-tribenzoate)”, Microporous Mesoporous Mater. (2015), 216, 42-50.

  • Hippauf, F.; Lunow, D.; Huettner, C.; Nickel, W.; Borchardt, L.; Henle, T.; Kaskel, S.: “Enhancing ACE-inhibition of food protein hydrolysates by selective adsorption using porous carbon materials”, Carbon (2015), 87, 309-316.

  • Hoffmann, C.; Plate, P.; Steinbrueck, A.; Kaskel, S.: “Nanoporous silicon carbide as nickel support for the carbon dioxide reforming of methane”, Catal.: Sci. Technol. (2015), 5(8), 4174-4183.

  • Kaskel, S.; Senkovska, I.: “Methane storage in metal-organic frameworks with ultrahigh porosity”, Prepr. – Am. Chem. Soc., Div. Energy Fuels (2015), 60(1), 387-388.

  • Kim, H.; Wu, F.; Lee, J. T.; Nitta, N.; Lin, H.-T.; Oschatz, M.; Cho, W. I.; Kaskel, S.; Borodin, O.; Yushin, G.: “In Situ Formation of Protective Coatings on Sulfur Cathodes in Lithium Batteries with LiFSI-Based Organic Electrolytes”, Adv. Energy Mater. (2015), 5(6), 1401792/1-1401792/8.

  • Kohl, M.; Brueckner, J.; Bauer, I.; Althues, H.; Kaskel, S.: “Synthesis of highly electrochemically active Li2S nanoparticles for lithium-sulfur-batteries”, J. Mater. Chem. A (2015), 3(31), 16307-16312.

  • Kutzscher, C.; Hoffmann, H. C.; Krause, S.; Stoeck, U.; Senkovska, I.; Brunner, E.; Kaskel, S.: “Proline Functionalization of the Mesoporous Metal-Organic Framework DUT-32”, Inorg. Chem. (2015), 54(3), 1003-1009.

  • Lee, J. T.; Kim, H.; Oschatz, M.; Lee, D.-C.; Wu, F.; Lin, H.-T.; Zdyrko, B.; Cho, W. I.; Kaskel, S.; Yushin, G.: “Micro- and Mesoporous Carbide-Derived Carbon-Selenium Cathodes for High-Performance Lithium Selenium Batteries”, Adv. Energy Mater. (2015), 5(1), 1400981/1-1400981/7.

  • Mueller, P.; Wisser, F. M.; Bon, V.; Gruenker, R.; Senkovska, I.; Kaskel, S.: “Postsynthetic Paddle-Wheel Cross-Linking and Functionalization of 1,3-Phenylenebis(azanetriyl)tetrabenzoate-Based MOFs”, Chem. Mater. (2015), 27(7), 2460-2467.

  • Nickel, W.; Oschatz, M.; Rico-Frances, S.; Klosz, S.; Biemelt, T.; Mondin, G.; Eychmueller, A.; Silvestre-Albero, J.; Kaskel, S.: “Synthesis of Ordered Mesoporous Carbon Materials by Dry Etching”, Chem. – Eur. J. (2015), 21(42), 14753-14757.

  • Nickerl, G.; Senkovska, I.; Kaskel, S.: “Tetrazine functionalized zirconium MOF as an optical sensor for oxidizing gases”, Chem. Commun. (Cambridge, U. K.) (2015), 51(12), 2280-2282.

  • Oschatz, M.; Leistner, M.; Nickel, W.; Kaskel, S.: “Advanced Structural Analysis of Nanoporous Materials by Thermal Response Measurements”, Langmuir (2015), 31(13), 4040-4047.

  • Oschatz, M.; Zeiger, M.; Jaeckel, N.; Strubel, P.; Borchardt, L.; Reinhold, R.; Nickel, W.; Eckert, J.; Presser, V.; Kaskel, S.: “Emulsion soft templating of carbide-derived carbon nanospheres with controllable porosity for capacitive electrochemical energy storage”, J. Mater. Chem. A (2015), 3(35), 17983-17990.

  • Piwko, M.; Althues, H.; Schumm, B.; Kaskel, S,: “Confocal microscopy for process monitoring and wide-area height determination of vertically-aligned carbon nanotube forests”, Coatings (2015), 5(3), 477-487.

  • Rengers, C.; Voitekhovich, S. V.; Kittler, S.; Wolf, A.; Adam, M.; Gaponik, N.; Kaskel, S.; Eychmueller, A.: “3D assembly of silica encapsulated semiconductor nanocrystals”, Nanoscale (2015), 7(29), 12713-12721.

  • Sandra, F.; Klein, N.; Leistner, M.; Lohe, M. R.; Benusch, M.; Woellner, M.; Grothe, J.; Kaskel, S.: “Speeding Up Chemisorption Analysis by Direct IR-Heat-Release Measurements (Infrasorp Technology): A Screening Alternative to Breakthrough Measurements”, Ind. Eng. Chem. Res. (2015), 54(26), 6677-6682.

  • Stoeck, U.; Senkovska, I.; Bon, V.; Krause, S.; Kaskel, S.: “Assembly of metal-organic polyhedra into highly porous frameworks for ethene delivery”, Chem. Commun. (Cambridge, U. K.) (2015), 51(6), 1046-1049.

  • Strubel, P.; Thieme, S.; Biemelt, T.; Helmer, A.; Oschatz, M.; Brueckner, J.; Althues, H.; Kaskel, S.: “ZnO Hard Templating for Synthesis of Hierarchical Porous Carbons with Tailored Porosity and High Performance in Lithium-Sulfur Battery”, Adv. Funct. Mater. (2015), 25(2), 287-297.

  • Thieme, S.; Brueckner, J.; Meier, A.; Bauer, I.; Gruber, K.; Kaspar, J.; Helmer, A.; Althues, H.; Schmuck, M.; Kaskel, S.: “A lithium-sulfur full cell with ultralong cycle life: influence of cathode structure and polysulfide additive”, J. Mater. Chem. A (2015), 3(7), 3808-3820.

  • Thieme, S.; Oschatz, M.; Nickel, W.; Brueckner, J.; Kaspar, J.; Althues, H.; Kaskel, S.: “Tailoring Commercially Available Raw Materials for Lithium-Sulfur Batteries with Superior Performance and Enhanced Shelf Life”, Energy Technol. (Weinheim, Ger.) (2015), 3(10), 1007-1013.

  • Wisser, D.; Brueckner, S. I.; Wisser, F. M.; Althoff-Ospelt, G.; Getzschmann, J.; Kaskel, S.; Brunner, E.: “1H-13C-29Si triple resonance and REDOR solid-state NMR - A tool to study interactions between biosilica and organic molecules in diatom cell walls”, Solid State Nucl. Magn. Reson. (2015), 66-67, 33-39.

  • Wisser, D.; Wisser, F. M.; Raschke, S.; Klein, N.; Leistner, M.; Grothe, J.; Brunner, E.; Kaskel, S.: “Biological Chitin-MOF Composites with Hierarchical Pore Systems for Air-Filtration Applications”, Angew. Chem. - Int. Ed. (2015), 54(43), 12588-12591.

  • Wisser, F. M.; Schumm, B.; Mondin, G.; Grothe, J.; Kaskel, S.: “Precursor strategies for metallic nano- and micropatterns using soft lithography”, J. Mater. Chem. C (2015), 3(12), 2717-2731.

  • Wollmann, P.; Gruber, F.; Graehlert, W.; Kaskel, S.: “Hyperspectral imaging for film analysis. High resolution, large surfaces and hundred percent control”, GIT Labor-Fachz. (2015), 59(5), 27-29.

  • Xu, Y.; Zhu, Y.; Kaskel, S.: “A smart magnetic nanosystem with controllable drug release and hyperthermia for potential cancer therapy”, RSC Adv. (2015), 5(121), 99875-99883.

  • Zhu, C.; Wen, D.; Leubner, S.; Oschatz, M.; Liu, W.; Holzschuh, M.; Simon, F.; Kaskel, S.; Eychmueller, A.: “Nickel cobalt oxide hollow nanosponges as advanced electrocatalysts for the oxygen evolution reaction”, Chem. Commun. (Cambridge, U. K.) (2015), 51(37), 7851-7854.

  • Zhu, C.; Wen, D.; Oschatz, M.; Holzschuh, M.; Liu, W.; Herrmann, A.-K.; Simon, F.; Kaskel, S.; Eychmueller, A.: “Kinetically Controlled Synthesis of PdNi Bimetallic Porous Nanostructures with Enhanced Electrocatalytic Activity”, Small (2015) 11(12), 1430-1434.

  • 2014

  • Bauer, I.; Kohl, M.; Althues, H.; Kaskel, S.: “Shuttle suppression in room temperature sodium-sulfur batteries using ion selective polymer membranes”, Chem. Commun. (Cambridge, U. K.) (2014), 50(24), 3208-3210.

  • Bauer, I.; Thieme, S.; Brueckner, J.; Althues, H.; Kaskel, S.: “Reduced polysulfide shuttle in lithium-sulfur batteries using Nafion-based separators”, J. Power Sources (2014), 251, 417-422.

  • Biemelt, T.; Selzer, C.; Schmidt, F.; Mondin, G.; Seifert, A.; Pinkert, K.; Spange, S.; Gemming, T.; Kaskel, S.: “Hierarchical porous zeolite ZSM-58 derived by desilication and desilication re-assembly”, Microporous Mesoporous Mater. (2014), 187, 114-124.

  • Bon, V.; Senkovska, I.; Wallacher, D.; Heerwig, A.; Klein, N.; Zizak, I.; Feyerherm, R.; Dudzik, E.; Kaskel, S.: “In situ monitoring of structural changes during the adsorption on flexible porous coordination polymers by X-ray powder diffraction: Instrumentation and experimental results”, Microporous Mesoporous Mater. (2014), 188, 190-195.

  • Bon, V.; Senkovska, I.; Wallacher, D.; Toebbens, D. M.; Zizak, I.; Feyerherm, R.; Mueller, U.; Kaskel, S.: “In Situ Observation of Gating Phenomena in the Flexible Porous Coordination Polymer Zn2(BPnDC)2(bpy) (SNU-9) in a Combined Diffraction and Gas Adsorption Experiment”, Inorg. Chem. (2014), 53(3), 1513-1520.

  • Borchardt, L.; Oschatz, M.; Graetz, S.; Lohe, M. R.; Rummeli, M. H.; Kaskel, S.: “A hard-templating route towards ordered mesoporous tungsten carbide and carbide-derived carbons”, Microporous Mesoporous Mater. (2014), 186, 163-167.

  • Borchardt, L.; Oschatz, M.; Kaskel, S.: “Tailoring porosity in carbon materials for supercapacitor applications”, Mater. Horiz. (2014), 1(2), 157-168.

  • Brueckner, J.; Thieme, S.; Böttger-Hiller, F.; Bauer, I.; Grossmann, H. T.; Strubel, P.; Althues, H.; Spange, S.; Kaskel, S.: “Carbon-Based Anodes for Lithium-Sulfur Full Cells with High Cycle Stability”, Adv. Funct. Mater. (2014), 24(9), 1284-1289.

  • Brueckner, J.; Thieme, S.; Bauer, I.; Thuemmler, P.; Althues, H.; Kaskel, S.: “Technologies for high-energy and long cycle life lithium-sulfur pouch-cell batteries”, Eur. Space Agency, [Spec. Publ.] SP (2014), SP-719 (10th European Space Power Conference, 2014), 1-4.

  • Brueckner, J.; Thieme, S.; Grossmann, H.; Doerfler, S.; Althues, H.; Kaskel, S.: “Lithium-sulfur batteries: influence of C-rate, amount of electrolyte and sulfur loading on cycle performance”, J. Power Sources (2014), 268, 82-87.

  • Diodati, S.; Nodari, L.; Natile, M. M.; Caneschi, A.; Fernández, C. J.; Hoffmann, C.; Kaskel, S.; Lieb, A.; Di Noto, V.; Mascotto, S.; Saini, R.; Gross, S.: “Coprecipitation of Oxalates: An Easy and Reproducible Wet-Chemistry Synthesis Route for Transition-Metal Ferrites”, Eur. J. Inorg. Chem. (2014), 875–887.

  • Doerfler, S.; Pinkert, K.; Weiser, M.; Wabnitz, C.; Goldberg, A.; Ferse, B.; Giebeler, L.; Althues, H.; Schneider, M.; Eckert, J.; Michaelis, A.; Beyer, E.; Kaskel, S.: “D2 Enertrode: Production Technologies and Component Integration of Nanostructured Carbon Electrodes for Energy Technology-Functionalized Carbon Materials for Efficient Electrical Energy Supply”, Adv. Eng. Mater. (2014), 16(10), 1196-1201.

  • Erbe, M.; Hänisch, J.; Freudenberg, T.; Kirchner, A.; Mönch, I.; Kaskel, S.; Schultz, L.; Holzapfel, B.: “Improved REBa2Cu3O7-x (RE = Y, Gd) structure and superconducting properties by addition of acetylacetone in TFA-MOD precursor solutions”, J. Mater. Chem. A (2014), 2(14), 4932-4944.

  • Faber, K.; Badaczewski, F.; Oschatz, M.; Mondin, G.; Nickel, W.; Kaskel, S.; Smarsly, B. M.: “In-Depth Investigation of the Carbon Microstructure of Silicon Carbide-Derived Carbons by Wide-Angle X-ray Scattering”, J. Phys. Chem. C (2014), 118(29), 15705-15715.

  • Fischer, S.; Schimanowitz, A.; Dawson, R.; Senkovska, I.; Kaskel, S.; Thomas, A.: “Cationic microporous polymer networks by polymerisation of weakly coordinating cations with CO2-storage ability”, J. Mater. Chem. A (2014) 2(30), 11825-11829.

  • Getzschmann, J.; Kaskel, S.: “K2S6, a Potassium Polysulfide with Long Sulfur Chain”, Z. Anorg. Allg. Chem. (2014), 640(5), 905-906.

  • Gruenker, R.; Bon V.; Mueller P.; Stoeck U.; Krause S.; Mueller U.; Senkovska I.; Kaskel S.: “A new metal-organic framework with ultra-high surface area”, Chem. Commun. (Cambridge, U. K.) (2014), 50, 3450-3452.

  • Hagen, M.; Quiroga-Gonzalez, E.; Doerfler, S.; Fahrer, G.; Tuebke, J.; Hoffmann, M. J.; Althues, H.; Speck, R.; Krampfert, M.; Kaskel, S.; et al: “Studies on preventing Li dendrite formation in Li-S batteries by using pre-lithiated Si microwire anodes”, J. Power Sources (2014), 248, 1058-1066.

  • Hao, G.-P.; Hippauf, F.; Oschatz, M.; Wisser, F. M.; Leifert, A.; Nickel, W.; Mohamed-Noriega, N.; Zheng, Z.; Kaskel, S.: “Stretchable and Semitransparent Conductive Hybrid Hydrogels for Flexible Supercapacitors”, ACS Nano (2014), 8(7), 7138-7146.

  • Hao, G.-P.; Oschatz, M.; Nickel, W.; Adam, M.; Kaskel, S.: “Design of Functional Nanostructured Carbons for Advanced Heterogeneous Catalysts: A Review”, Curr. Org. Chem. (2014), 18(10), 1262-1279.

  • Herrmann, A.-K.; Formanek, P.; Borchardt, L.; Klose, M.; Giebeler, L.; Eckert, J.; Kaskel, S.; Gaponik, N.; Eychmueller, A.: “Multimetallic Aerogels by Template-Free Self-Assembly of Au, Ag, Pt, and Pd Nanoparticles”, Chem. Mater. (2014), 26(2), 1074-1083.

  • Hippauf, F.; Doerfler, S.; Zedlitz, R.; Vater, A.; Kaskel, S.: “Continuous electrooxidation of sulfuric acid on boron-doped diamond electrodes”, Electrochim. Acta (2014), 147, 589-595.

  • Hippauf, F.; Lunow, D.; Borchardt, L.; Henle, T.; Kaskel, S.: “Extraction of ACE-inhibiting dipeptides from protein hydrolyzates using porous carbon materials”, Carbon (2014), 77, 191-198.

  • Hoffmann, C.; Biemelt, T.; Lohe, M. R.; Ruemmeli, M. H.; Kaskel, S.: “Nanoporous and Highly Active Silicon Carbide Supported CeO2-Catalysts for the Methane Oxidation Reaction”, Small (2014), 10(2), 316-322.

  • Hoffmann, C.; Reinhardt, B.; Enke, D.; Kaskel, S.: “Inverse silicon carbide replica of porous glasses”, Microporous Mesoporous Mater. (2014), 184, 1-6.

  • Hoffmann, C.; Thieme, S.; Brueckner, J.; Oschatz, M.; Biemelt, T.; Mondin, G.; Althues, H.; Kaskel, S.: “Nanocasting Hierarchical Carbide-Derived Carbons in Nanostructured Opal Assemblies for High-Performance Cathodes in Lithium-Sulfur Batteries”, ACS Nano (2014), 8(12), 12130-12140.

  • Keceli, E.; Hemgesberg, M.; Gruenker, R.; Bon, V.; Wilhelm, C.; Philippi, T.; Schoch, R.; Sun, Y.; Bauer, M.;Ernst, S.; Kaskel, S.; Thiel, W. R.: “A series of amide functinalized isoreticular metal organic frameworks”, Microporous Mesoporous Mater. (2014), 194, 115-125.

  • Leifert, A.; Mondin, G.; Doerfler, S.; Hampel, S.; Kaskel, S.; Hofmann, E.; Zschetzsche, J.; Pflug, E.; Dietrich, G.; Ruehl, M.; Braun, S.; Schaedlich, S.: “Fabrication of Nanoparticle-Containing Films and Nano Layers for Alloying and Joining”, Adv. Eng. Mater. (2014), 16(10), 1264-1269.

  • Liebich, J.; Althues, H.; Kaskel, S.: “Conductive polymer surfaces through CNT thin films”, Galvanotechnik (2014), 105(8), 1772-1775.

  • Meier, A.; Weinberger, M.; Pinkert, K.; Oschatz, M.; Paasch, S.; Giebeler, L.; Althues, H.; Brunner, E.; Eckert, J.; Kaskel, S.: “Silicon oxycarbide-derived carbons from a polyphenylsilsequioxane precursor for supercapacitor applications”, Microporous Mesoporous Mater. (2014), 188, 140-148.

  • Mondin, G.; Haft, M.; Wisser, F. M.; Leifert, A.; Mohamed-Noriega, N.; Doerfler, S.; Hampel, S.; Grothe, J.; Kaskel, S.: “Investigations of mussel-inspired polydopamine deposition on WC and Al2O3 particles: The influence of particle size and material”, Mater. Chem. Phys. (2014), 148(3), 624-630.

  • Nickel, W.; Oschatz, M.; von der Lehr, M.; Leistner, M.; Hao, G.-P.; Adelhelm, P.; Mueller, P.; Smarsly, B. M.; Kaskel, S.: “Direct synthesis of carbide-derived carbon monoliths with hierarchical pore design by hard-templating”, J. Mater. Chem. A (2014), 2(32), 12703-12707.

  • Nickerl, G.; Leistner, M.; Helten, S.; Bon, V.; Senkovska, I.; Kaskel, S.: “Integration of accessible secondary metal sites into MOFs for H2S removal”, Inorg. Chem. Front. (2014), 1(4), 325-330.

  • Nickerl, G.; Stoeck, U.; Burkhardt, U.; Senkovska, I.; Kaskel, S.: “A catalytically active porous coordination polymer based on a dinuclear rhodium paddle-wheel unit”, J. Mater. Chem. A (2014), 2 (1), 144 - 148.

  • Niekiel, F.; Lannoeye, J.; Reinsch, H.; Munn, A. S.; Heerwig, A.; Zizak, I.; Kaskel, S.; Walton, R. I.; de Vos, Dirk; Llewellyn, P.; Lieb, A.; Maurin, G.; Stock, N.: “Conformation-Controlled Sorption Properties and Breathing of the Aliphatic Al-MOF [Al(OH)(CDC)]”, Inorg. Chem. (2014) 53(9), 4610-4620.

  • Oschatz, M.; Borchardt, L.; Pinkert, K.; Thieme, S.; Lohe, M. R.; Hoffmann, C.; Benusch, M.; Wisser, F. M.; Ziegler, C.; Giebeler, L.; Ruemmeli, M. H.; Eckert, J.; Eychmueller, A.; Kaskel, S.: “Hierarchical Carbide-Derived Carbon Foams with Advanced Mesostructure as a Versatile Electrochemical Energy-Storage Material”, Adv. Energy Mater. (2014), 4(2), 1300645/1-1300645/9.

  • Oschatz, M.; Boukhalfa, S.; Nickel, W.; Lee, J. T.; Klosz, S.; Borchardt, L.; Eychmueller, A.; Yushin, G.; Kaskel, S.: “Kroll-carbons based on silica and alumina templates as high-rate electrode materials in electrochemical double-layer capacitors”, J. Mater. Chem. A (2014), 2(14), 5131-5139.

  • Oschatz, M.; Hoffmann, H. C.; Pallmann, J.; Schaber, J.; Borchardt, L.; Nickel, W.; Senkovska, I.; Rico-Frances, S.; Silvestre-Albero, J.; Kaskel, S.; Brunner, E.: “Structural Characterization of Micro- and Mesoporous Carbon Materials Using In Situ High Pressure 129Xe NMR Spectroscopy”, Chem. Mater. (2014), 26(10), 3280-3288.

  • Oschatz, M.; Lee, J. T.; Kim, H.; Nickel, W.; Borchardt, L.; Cho, W. I.; Ziegler, C.; Kaskel, S.; Yushin, G.: “Micro- and mesoporous carbide-derived carbon prepared by a sacrificial template method in high performance lithium sulfur battery cathodes”, J. Mater. Chem. A (2014), 2(41), 17649-17654.

  • Oschatz, M.; Nickel, W.; Thommes, M.; Cychosz, K. A.; Leistner, M.; Adam, M.; Mondin, G.; Strubel, P.; Borchardt, L.; Kaskel, S.: “Evolution of porosity in carbide-derived carbon aerogels”, J. Mater. Chem. A (2014), 2(43), 18472-18479.

  • Pinkert, K.; Oschatz, M.; Borchardt, L.; Klose, M.; Zier, M.; Nickel, W.; Giebeler, L.; Oswald, S.; Kaskel, S.; Eckert, J.: “Role of Surface Functional Groups in Ordered Mesoporous Carbide-Derived Carbon/Ionic Liquid Electrolyte Double-Layer Capacitor Interfaces”, ACS Appl. Mater. Interfaces (2014), 6(4), 2922-2928.

  • Sakaushi, K.; Hosono, E.; Nickerl, G.; Zhou, H.; Kaskel, S.; Eckert, J.: “Bipolar porous polymeric frameworks for low-cost, high-power, long-life all-organic energy storage devices”, J. Power Sources (2014), 245, 553-556.

  • Schumm, B.; Kaskel, S.: “Nanoimprint lithography for photovoltaic applications”, Sol. Cell Nanotechnol. (2014), 185-201.

  • Schneemann, A.; Bon, V.; Schwedler, I.; Senkovska, I.; Kaskel, S.; Fischer, R. A.: “Flexible metal-organic frameworks”, Chem. Soc. Rev. (2014), 43(16), 6062-6096.

  • Senkovska, I.; Kaskel, S.: “Ultrahigh porosity in mesoporous MOFs: promises and limitations”, Chem. Commun. (Cambridge, U. K.) (2014), 50(54), 7089-7098.

  • Shilapuram, V.; Ozalp, N.; Oschatz, M.; Borchardt, L.; Kaskel, S.: “Hydrogen production from catalytic decomposition of methane over ordered mesoporous carbons (CMK-3) and carbide-derived carbon (DUT-19)”, Carbon (2014), 67, 377-389.

  • Shilapuram, V.; Ozalp, N.; Oschatz, M.; Borchardt, L.; Kaskel, S.; Lachance, R.: “Thermogravimetric analysis of activated carbons, ordered mesoporous carbide-derived carbons, and their deactivation kinetics of catalytic methane decomposition”, Ind. Eng. Chem. Res. (2014), 53(5), 1741-1753.

  • Siddiqui, M. M.; Mobin, S. M.; Senkovska, I.; Kaskel, S.; Balakrishna, M. S.: “Novel zeotype frameworks with soft cyclodiphosphazane linkers and soft Cu4X4 clusters as nodes”, Chem. Commun. (Cambridge, U. K.) (2014), 50(82), 12273-12276.

  • Wang, J.; Senkovska, I.; Kaskel, S.; Liu, Q.: “Chemically activated fungi-based porous carbons for hydrogen storgage”, Carbon (2014), 75, 372-380.

  • Wen, D.; Herrmann, A.-K.; Borchardt, L.; Simon, F.; Liu, W.; Kaskel, S.; Eychmueller, A.: “Controlling the Growth of Palladium Aerogels with High-Performance toward Bioelectrocatalytic Oxidation of Glucose”, J. Am. Chem. Soc. (2014), 136(7), 2727-30.

  • Wisser, F. M.; Eckhardt, K.; Wisser, D.; Boehlmann, W.; Grothe, J.; Brunner, E.; Kaskel, S.: “Tailoring Pore Structure and Properties of Functionalized Porous Polymers by Cyclotrimerization”, Macromolecules (Washington, DC, U. S.) (2014), 47(13), 4210-4216.

  • 2013

  • Bachmatiuk, A.; Mendes, R. G.; Hirsch, C.; Jaehne, C.; Lohe, M. R.; Grothe, J.; Kaskel, S.; Fu, L.; Klingeler, R.; Eckert, J.; Wick, P.; Ruemmeli, M. H.: “Few-Layer Graphene Shells and Nonmagnetic Encapsulates: A Versatile and Nontoxic Carbon Nanomaterial”, ACS Nano (2013), 7(12), 10552-10562.

  • Bon, V.; Senkovska, I.; Baburin, I. A.; Kaskel, S.: “Zr- and Hf-Based Metal-Organic Frameworks: Tracking Down the Polymorphism”, Cryst. Growth Des. (2013), 13(3), 1231-1237.

  • Bon, V.; Senkovska, I., Weiss, M. S.; Kaskel, S.: “Tailoring of network dimensionality and porosity adjustment in Zr- and Hf-based MOFs”, CrystEngComm (2013), 15, 9572-9577.

  • Bonilla, M. R.; Titze, T.; Schmidt, F.; Mehlhorn, D.; Chmelik, C.; Valiullin, R.; Bhatia, S. K.; Kaskel, S.; Ryoo, R.; Kaerger, J.: “Diffusion study by IR micro-imaging of molecular uptake and release on mesoporous zeolites of structure type CHA and LTA”, Materials (2013), 6, 2662-2688.

  • Borchardt, L.; Oschatz, M.; Paasch, S.; Kaskel, S.; Brunner, E.: “Interaction of electrolyte molecules with carbon materials of well-defined porosity: characterization by solid-state NMR spectroscopy”, Phys. Chem. Chem. Phys. (2013), 15(36), 15177-15184.

  • Boettger-Hiller, F.; Kempe, P.; Cox, G.; Panchenko, A.; Janssen, N.; Petzold, A.; Thurn-Albrecht, T.; Borchardt, L.; Rose, M.; Kaskel, S.; Georgi, C.; Lang, H.; Spange, S.: “Twin Polymerization at Spherical Hard Templates: An Approach to Size-Adjustable Carbon Hollow Spheres with Micro- or Mesoporous Shells”, Angew. Chem., Int. Ed. (2013), 52(23), 6088-6091.

  • Doerfler, S.; Felhoesi, I.; Marek, T.; Thieme, S.; Althues, H.; Nyikos, L.; Kaskel, S.: “High-power supercapacitor electrodes based on vertically-aligned carbon nanotubes on aluminum”, J. Power Sources (2013), 227, 218-228.

  • Fritsch, J.; Drache, F.; Nickerl, G.; Boehlmann, W.; Kaskel, S.: “Porous phosphorus-based element organic frameworks: A new platform for transition metal catalysts immobilization”, Microporous Mesoporous Mater. (2013), 172, 167-173.

  • Fritsch, J.; Wisser, F. M.; Eckhardt, K.; Bon, V.; Mondin, G.; Schumm, B.; Grothe, J.; Kaskel, S.: “A new molecular silver precursor for the preparation of thin conductive silver films”, J. Phys. Chem. Solids (2013), 74(11), 1546-1552.

  • Hagen, M.; Doerfler, S.; Fanz, P.; Berger, T.; Speck, R.; Tuebke, J.; Althues, H.; Hoffmann, M. J.; Scherr, C.; Kaskel, S.: “Development and costs calculation of lithium-sulfur cells with high sulfur load and binder free electrodes”, J. Power Sources (2013), 224, 260-268.

  • Hagen, M.; Feisthammel, G.; Fanz, P.; Grossmann, H. T.; Doerfler, S.; Tuebke, J.; Hoffmann, M. J.; Boerner, D.; Joos, M.; Althues, H.; Kaskel, S.: “Sulfur cathodes with carbon current collector for Li-S cells”, J. Electrochem. Soc. (2013), 160(6), A996-A1002.

  • Hagen, M.; Schiffels, P.; Hammer, M.; Doerfler, S.; Tuebke, J.; Hoffmann, M. J.; Althues, H.; Kaskel, S.: “In-situ Raman investigation of polysulfide formation in Li-S cells”, J. Electrochem. Soc. (2013), 160(8), A1205-A1214.

  • Hendel, T.; Lesnyak, V.; Kuehn, L.; Herrmann, A.-K.; Bigall, N. C.; Borchardt, L.; Kaskel, S.; Gaponik, N.; Eychmueller, A.: “Mixed Aerogels from Au and CdTe Nanoparticles”, Adv. Funct. Mater. (2013), 23(15), 1903-1911.

  • Kim, H.; Lee, J. T.; Lee, D.-C.; Oschatz, M.; Cho, W. I.; Kaskel, S.; Yushin, G.: “Enhancing performance of Li-S cells using a Li-Al alloy anode coating”, Electrochem. Commun. (2013), 36, 38-41.

  • Kotte, L.; Althues, H.; Maeder, G.; Roch, J.; Kaskel, S.; Dani, I.; Mertens, T.; Gammel, F. J.: “Atmospheric pressure PECVD based on a linearly extended DC arc for adhesion promotion applications”, Surf. Coat. Technol. (2013), 234, 8-13.

  • Kotte, L.; Maeder, G.; Roch, J.; Leupolt, B.; Kaskel, S.; Wielang, J.; Mertens, T.; Gammel, F. J.: “Plasma pre-treatment of large surface areas using a LARGE plasma source”, Galvanotechnik (2013), 104(9), 1742-1753.

  • Lee, J. T.; Zhao, Y.; Thieme, S.; Kim, H.; Oschatz, M.; Borchardt, L.; Magasinski, A.; Cho, W. I.; Kaskel, S.; Yushin, G.: “Sulfur-Infiltrated Micro- and Mesoporous Silicon Carbide-Derived Carbon Cathode for High-Performance Lithium Sulfur Batteries”, Adv. Mater. (Weinheim, Ger.) (2013), 25(33), 4573-4579.

  • Leistner, M.; Graehlert, W.; Kaskel, S.: “Screening of Porous Materials by Thermal Response Measurements”, Chem. Ing. Tech. (2013), 85(5), 747-752.

  • Liu, W.; Rodriguez, P.; Borchardt, L.; Foelske, A.; Yuan, J.; Herrmann, A.-K.; Geiger, D.; Zheng, Z.; Kaskel, S.; Gaponik, N.; Koetz, R.; Schmidt, T. J.; Eychmueller, A.: “Bimetallic aerogels: high-performance electrocatalysts for the oxygen reduction reaction”, Angew. Chem., Int. Ed. (2013), 52(37), 9849-9852.

  • Martin, J. R.; Borchardt, L.; Oschatz, M.; Mondin, G.; Kaskel, S.: “Titanium Carbide and Carbide-Derived Carbon Composite Nanofibers by Electrospinning of Ti-Resin Precursor”, Chem. Ing. Tech. (2013), 85(11), 1742-1748.

  • Mondin, G.; Lohe, M. R.; Wisser, F. M.; Grothe, J.; Mohamed-Noriega, N.; Leifert, A.; Dörfler, S.; Bachmatiuk, A.; Rümmeli, M. H.; Kaskel, S.: “Electroless copper deposition on (3-mercaptopropyl)triethoxysilane-coated silica and alumina nanoparticles”, Electrochim. Acta (2013), 114, 521-526.

  • Mondin, G.; Schumm, B.; Fritsch, J.; Grothe, J.; Kaskel, S.: “Fabrication of micro- and submicrometer silver patterns by microcontact printing of mercaptosilanes and direct electroless metallization”, Microelectron. Eng. (2013), 104, 100-104.

  • Mondin, G.; Schumm, B.; Fritsch, J.; Hensel, R.; Grothe, J.; Kaskel, S.: “Fast patterning of poly(methyl methacrylate) by a novel soft molding approach and its application to the fabrication of silver structures”, Mater. Chem. Phys. (2013), 137(3), 884-891.

  • Mondin, G.; Wisser, F. M.; Leifert, A.; Mohamed-Noriega, N.; Grothe, J.; Doerfler, S.; Kaskel, S.: “Metal deposition by electroless plating on polydopamine functionalized micro- and nanoparticles”, J. Colloid Interface Sci. (2013), 411, 187-193.

  • Nickerl, G.; Notzon, A.; Heitbaum, M.; Senkovska, I.; Glorius, F.; Kaskel, S.: “Selective Adsorption Properties of Cationic Metal-Organic Frameworks Based on Imidazolic Linker”, Cryst. Growth Des. (2013), 13(1), 198-203.

  • Oschatz, M.; Borchardt, L.; Rico-Frances, S.; Rodriguez-Reinoso, F.; Kaskel, S.; Silvestre-Albero, J.: “Textural characterization of micro- and mesoporous carbons using combined gas adsorption and n-nonane preadsorption”, Langmuir (2013), 29(25), 8133-8139.

  • Oschatz, M.; Borchardt, L.; Senkovska, I.; Klein, N.; Leistner, M.; Kaskel, S.: “Carbon dioxide activated carbide-derived carbon monoliths as high performance adsorbents”, Carbon (2013), 56, 139-145.

  • Oschatz, M.; Thieme, S.; Borchardt, L.; Lohe, M. R.; Biemelt, T.; Brueckner, J.; Althues, H.; Kaskel, S.: “A new route for the preparation of mesoporous carbon materials with high performance in lithium-sulphur battery cathodes”, Chem. Commun. (Cambridge, U. K.) (2013), 49(52), 5832-5834.

  • Padial, N. M.; Quartapelle Procopio, E.; Montoro, C.; Lopez, E.; Oltra, J. E.; Colombo, V.; Maspero, A.; Masciocchi, N.; Galli, S.; Senkovska, I.; Kaskel, S.; Barea, E.; Navarro, J. A. R.: “Highly Hydrophobic Isoreticular Porous Metal-Organic Frameworks for the Capture of Harmful Volatile Organic Compounds”, Angew. Chem., Int. Ed. (2013), 52(32), 8290-8294.

  • Pinkert, K.; Giebeler, L.; Herklotz, M.; Oswald, S.; Thomas, J.; Meier, A.; Borchardt, L.; Kaskel, S.; Ehrenberg, H.; Eckert, J.: “Functionalised porous nanocomposites: a multidisciplinary approach to investigate designed structures for supercapacitor applications”, J. Mater. Chem. A (2013), 1(15), 4904-4910.

  • Porada, S.; Borchardt, L.; Oschatz, M.; Bryjak, M.; Atchison, J. S.; Keesman, K. J.; Kaskel, S.; Biesheuvel, P. M.; Presser, V.: “Direct prediction of the desalination performance of porous carbon electrodes for capacitive deionization”, Energy Environ. Sci. (2013), 6(12), 3700-3712.

  • Sakaushi, K.; Hosono, E.; Nickerl, G.; Gemming, T.; Zhou, H.; Kaskel, S.; Eckert, J.: “Aromatic porous-honeycomb electrodes for a sodium-organic energy storage device”, Nat. commun. (2013), 4, 1485.

  • Sakaushi, K.; Nickerl, G.; Kandpal, H. C.; Cano-Cortes, L.; Gemming, T.; Eckert, J.; Kaskel, S.; van den Brink, J.: “Polymeric Frameworks as Organic Semiconductors with Controlled Electronic Properties”, J. Phys. Chem. Lett. (2013), 4(17), 2977-2981.

  • Sakaushi, K.; Thomas, J.; Kaskel, S.; Eckert, J.: “Aqueous Solution Process for the Synthesis and Assembly of Nanostructured One-Dimensional α-MoO3 Electrode Materials”, Chem. Mater. (2013), 25(12), 2557-2563.

  • Santra, A.; Senkovska, I.; Kaskel, S.; Bharadwaj, P. K.: “Gas Storage in a Partially Fluorinated Highly Stable Three-Dimensional Porous Metal-Organic Framework”, Inorg. Chem. (2013), 52(13), 7358-7366.

  • Schlechte, L.; Bon, V.; Gruenker, R.; Klein, N.; Senkovska, I.; Kaskel, S.: “Reprint of: Structural diversity of cobalt(II) coordination compounds involving bent imidazole ligand: A route from 0D dimer to 3D coordination polymer”, Polyhedron (2013), 52, 1481-1488.

  • Schmidt, F.; Hoffmann, C.; Giordanino, F.; Bordiga, S.; Simon, P.; Carrillo-Cabrera, W.; Kaskel, S.: “Coke location in microporous and hierarchical ZSM-5 and the impact on the MTH reaction”, J. Catal. (2013), 307, 238-245.

  • Schmidt, F.; Lohe, M. R.; Buechner, B.; Giordanino, F.; Bonino, F.; Kaskel, S.: “Improved catalytic performance of hierarchical ZSM-5 synthesized by desilication with surfactants”, Microporous Mesoporous Mater. (2013), 165, 148-157.

  • Schmieder, P.; Denysenko, D.; Grzywa, M.; Baumgaertner, B.; Senkovska, I.; Kaskel, S.; Sastre, G.; van Wuellen, L.; Volkmer, D.: “CFA-1: the First Chiral Metal-organic Framework Containing Kuratowski-type Secondary Building Units”, Dalton Trans. (2013), 42(30), 10786-10797.

  • Schneider, M.; Weiser, M.; Doerfler, S.; Althues, H.; Kaskel, S.; Michaelis, A.: “Pulse plating of platinum on aligned multiwalled carbon nanotubes”, Surf. Eng. (2013), 29(6), 427-433.

  • Schumm, B.; Wisser, F. M.; Mondin, G.; Hippauf, F.; Fritsch, J.; Grothe, J.; Kaskel, S.: “Semi-transparent silver electrodes for flexible electronic devices prepared by nanoimprint lithography”, J. Mater. Chem. C (2013), 1(4), 638-645.

  • Thieme, S.; Brueckner, J.; Bauer, I.; Oschatz, M.; Borchardt, L.; Althues, H.; Kaskel, S.: “High capacity micro-mesoporous carbon-sulfur nanocomposite cathodes with enhanced cycling stability prepared by a solvent-free procedure”, J. Mater. Chem. A (2013), 1(32), 9225-9234.

  • Wang, J.; Oschatz, M.; Biemelt, T.; Lohe, M. R.; Borchardt, L.; Kaskel, S.: “Preparation of cubic ordered mesoporous silicon carbide monoliths by pressure assisted preceramic polymer nanocasting”, Microporous Mesoporous Mater. (2013), 168, 142-147.

  • Wang, J.; Senkovska, I.; Oschatz, M.; Lohe, M. R.; Borchardt, L.; Heerwig, A.; Liu, Q.; Kaskel, S.: “Highly porous nitrogen-doped polyimine-based carbons with adjustable microstructures for CO2 capture”, J. Mater. Chem. A (2013), 1(36), 10951-10961.

  • Wang, J.; Senkovska, I.; Oschatz, M.; Lohe, M. R.; Borchardt, L.; Heerwig, A.; Liu, Q.; Kaskel, S.: “Imine-Linked Polymer-Derived Nitrogen-Doped Microporous Carbons with Excellent CO2 Capture Properties”, ACS Appl. Mater. Interfaces (2013), 5(8), 3160-7.

  • Wee, L. H.; Lescouet, T.; Fritsch, J.; Bonino, F.; Rose, M.; Sui, Z.; Garrier, E.; Packet, D.; Bordiga, S.; Kaskel, S.; Herskowitz, M.; Farrusseng, D.; Martens, J. A.: “Synthesis of Monoglycerides by Esterification of Oleic Acid with Glycerol in Heterogeneous Catalytic Process Using Tin-Organic Framework Catalyst”, Catal. Lett. (2013), 143(4), 356-363.

  • Wisser, F. M.; Schumm, B.; Meier, A.; Engel, T.; Grothe, J.; Kickelbick, G.; Kaskel, S.: “Preparation and microcontact printing of platinum and palladium thin films”, J. Mater. Chem. C (2013), 1(13), 2477-2484.

  • Zhu, Y.; Shang, F.; Li, B.; Dong, Y.; Liu, Y.; Lohe, M. R.; Hanagata, N.; Kaskel, S.: “Magnetic mesoporous bioactive glass scaffolds: preparation, physicochemistry and biological properties”, J. Mater. Chem. B (2013), 1(9), 1279-1288.

  • 2012

  • Boldt, R.; Grigas, A.; Heise, M.; Herrmannsdoerfer, T.; Isaeva, A.; Kaskel, S.; Koehler, D.; Ruck, M.; Skrotzki, R.; Wosnitza, J.: “Semimetallic Paramagnetic Nano-Bi2Ir and Superconducting Ferromagnetic Nano-Bi3Ni by Microwave-Assisted Synthesis and Room Temperature Pseudomorphosis”, Z. Anorg. Allg. Chem. (2012), 638(12-13), 2035-2043.

  • Bon, V.; Senkovskyy, V.; Senkovska, I.; Kaskel, S.: “Zr(IV) and Hf(IV) based metal-organic frameworks with reo-topology”, Chemical Commun. (Cambridge, U. K.) (2012), 48(67), 8407-8409.

  • Borchardt, L.; Hasche, F.; Lohe, M. R.; Oschatz, M.; Schmidt, F.; Kockrick, E.; Ziegler, C.; Lescouet, T.; Bachmatiuk, A.; Buechner, B.; Farrusseng, D.; Strasser, P.; Kaskel, S.: “Transition metal loaded silicon carbide-derived carbons with enhanced catalytic properties”, Carbon (2012), 50(5), 1861-1870.

  • Borchardt, L.; Hoffmann, C.; Oschatz, M.; Mammitzsch, L.; Petasch, U.; Herrmann, M.; Kaskel, S.: “Preparation and application of cellular and nanoporous carbides”, Chem. Soc. Rev. (2012), 41(15), 5053-5067.

  • Borchardt, L.; Oschatz, M.; Lohe, M.; Presser, V.; Gogotsi, Y.; Kaskel, S.: “Ordered mesoporous carbide-derived carbons prepared by soft templating”, Carbon (2012), 50(11), 3987-3994.

  • Chatzimpaloglou, A.; Yavropoulou, M. P.; Rooij, K. E.; Biedermann, R.; Mueller, U.; Kaskel, S.; Sarli, V.: “Total Synthesis and Biological Activity of the Proposed Structure of Phaeosphaeride A”, J. Org. Chem. (2012), 77(21), 9659-9667.

  • Debatin, F.; Behrens, K.; Weber, J.; Baburin, I. A.; Thomas, A.; Schmidt, J.; Senkovska, I.; Kaskel, S.; Kelling, A.; Hedin, N.; Bacsik, Z.; Leoni, S.; Seifert, G.; Jaeger, C.; Guenter, C.; Schilde, U.; Friedrich, A.; Holdt, H.-J.: “An Isoreticular Family of Microporous Metal-Organic Frameworks Based on Zinc and 2-Substituted Imidazolate-4-amide-5-imidate: Syntheses, Structures and Properties”, Chem. - Eur. J. (2012), 18(37), 11630-11640.

  • Doerfler, S.; Felhoesi, I.; Kek, I.; Marek, T.; Althues, H.; Kaskel, S.; Nyikos, L.: “Tailoring structural and electrochemical properties of vertical aligned carbon nanotubes on metal foil using scalable wet-chemical catalyst deposition”, J. Power Sources (2012), 208, 426-433.

  • Doerfler, S.; Hagen, M.; Althues, H.; Tubke, J.; Kaskel, S.; Hoffmann, M. J.: “High capacity vertical aligned carbon nanotube/sulfur composite cathodes for lithium-sulfur batteries”, Chem. Commun. (Cambridge, U. K.) (2012), 48(34), 4097-4099.

  • Dueren, T.; Kaskel, S.; Llewellyn, P.; Nick, L.; Rodriguez-Reinoso, F.: “Special issue Characterisation of Porous Solid IX”, Microporous Mesoporous Mater. (2012), 154, 1.

  • Frind, R.; Borchardt, L.; Kockrick, E.; Mammitzsch, L.; Petasch, U.; Herrmann, M.; Kaskel, S.: “Complete and partial oxidation of methane on ceria/platinum silicon carbide nanocomposites”, Catal. Sci. Technol. (2012), 2(1), 139-146.

  • Fritsch, J.; Schumm, B.; Biedermann, R.; Grothe, J.; Kaskel, S.: “A New Silver-Based Precursor as Ink for Soft Printing Techniques”, Eur. J. Inorg. Chem. (2012), 2012(5), 878-883.

  • Gruenker, R.; Bon, V.; Heerwig, A.; Klein, N.; Mueller, P.; Stoeck, U.; Baburin, I. A.; Mueller, U.; Senkovska, I.; Kaskel, S.: “Dye Encapsulation Inside a New Mesoporous Metal-Organic Framework for Multifunctional Solvatochromic-Response Function”, Chem. – Eur. J. (2012), 18(42), 13299-13303, S13299/1-S13299/21.

  • Hagen, M.; Doerfler, S.; Althues, H.; Tuebke, J.; Hoffmann, M. J.; Kaskel, S.; Pinkwart, K.: “Lithium-sulphur batteries - binder free carbon nanotubes electrode examined with various electrolytes”, J. Power Sources (2012), 213, 239-248.

  • Hauptvogel, I. M.; Bon, V.; Gruenker, R.; Baburin, I. A.; Senkovska, I.; Mueller, U.; Kaskel, S.: “A family of 2D and 3D coordination polymers involving a trigonal tritopic linker”, Dalton Trans. (2012), 41(14), 4172-4179.

  • Hoffmann, C.; Biemelt, T.; Seifert, A.; Pinkert, K.; Gemming, T.; Spange, S.; Kaskel, S.: “Polymer-derived nanoporous silicon carbide with monodisperse spherical pores”, J. Mater. Chem. (2012), 22(47), 24841-24847.

  • Hoffmann, H. C.; Debowski, M.; Mueller, P.; Paasch, S.; Senkovska, I.; Kaskel, S.; Brunner, E.: “Solid-state NMR spectroscopy of metal-organic framework compounds (MOFs)”, Materials (2012), 5, 2537-2572.

  • Hoffmann, H. C.; Paasch, S.; Mueller, P.; Senkovska, I.; Padmanaban, M.; Glorius, F.; Kaskel, S.; B., Eike: “Chiral recognition in metal-organic frameworks studied by solid-state NMR spectroscopy using chiral solvating agents”, Chem. Commun. (Cambridge, U. K.) (2012), 48(85), 10484-10486.

  • Huang, X.; Hauptmann, N.; Appelhans, D.; Formanek, P.; Frank, S.; Kaskel, S.; Temme, A.; Voit, B.: “Synthesis of Hetero-Polymer Functionalized Nanocarriers by Combining Surface-Initiated ATRP and RAFT Polymerization”, Small (2012), 8(23), 3579-3583.

  • Kaskel, S.; Fischer, R.: “Themed issue: integrating functionality into metal-organic frameworks”, J. Mater. Chem. (2012), 22(20), 10093.

  • Klausch, A.; Althues, H.; Freudenberg, T.; Kaskel, S.: “Wet chemical preparation of YVO4:Eu thin films as red-emitting phosphor layers for fully transparent flat dielectric discharge lamp”, Thin Solid Films (2012), 520(13), 4297-4301.

  • Klein, N.; Hoffmann, H. C.; Cadiau, A.; Getzschmann, J.; Lohe, M. R.; Paasch, S.; Heydenreich, T.; Adil, K.; Senkovska, I.; Brunner, E.: “Structural flexibility and intrinsic dynamics in the M2(2,6-ndc)2(dabco) (M = Ni, Cu, Co, Zn) metal-organic frameworks”, J. Mater. Chem. (2012), 22(20), 10303-10312.

  • Kotte, L.; Maeder, G.; Roch, J.; Leupolt, B.; Kaskel, S.; Wielant, J.; Mertens, T.; Gammel, F. J.: “Large-area plasma pretreatment and atmospheric-pressure PECVD using the LARGE plasma source”, Jahrb. Oberflaechentech. (2012), 68,49-60.

  • Langheinrich, D.; Doerfler, S.; Althues, H.; Kaskel, S.; Lasagni, A.: “Rapid and scalable method for direct and indirect microstructuring of vertical aligned carbon nanotubes”, Surf. Coat. Technol. (2012), 206(23), 4808-4813.

  • Liebich, J.; Althues, H.; Kaskel, S.: “Conductive polymer surfaces through CNT thin films”, Jahrb. Oberflaechentech. (2012), 68, 311-314.

  • Liu, W.; Herrmann, A.-K.; Geiger, D.; Borchardt, L.; Simon, F.; Kaskel, S.; Gaponik, N.; Eychmueller, A.: “High-Performance Electrocatalysis on Palladium Aerogels”, Angew. Chem., Int. Ed. (2012), 51(23), 5743-5747, S5743/1-S5743/17.

  • Mertens, T.; Gammel, F. J.; Kolb, M.; Rohr, O.; Kotte, L.; Tschoecke, S.; Kaskel, S.; Krupp, U.: “Investigation of surface pre-treatments for the structural bonding of titanium”, Catal. Sci. Technol. (2012), 34, 46-54.

  • Oschatz, M.; Borchardt, L.; Thommes, M.; Cychosz, K. A.; Senkovska, I.; Klein, N.; Frind, R.; Leistner, M.; Presser, V.; Gogotsi, Y.; Kaskel, S.: “Carbide-Derived Carbon Monoliths with Hierarchical Pore Architectures”, Angew. Chem., Int. Ed. (2012), 51(30), 7577-7580, S7577/1-S7577/9.

  • Sakaushi, K.; Nickerl, G.; Wisser, F. M.; Nishio-Hamane, D.; Hosono, E.; Zhou, H.; Kaskel, S.; Eckert, J.: “An Energy Storage Principle using Bipolar Porous Polymeric Frameworks”, Angew. Chem., Int. Ed. (2012), 51(31), 7850-7854, S7850/1-S7850/21.

  • Schlechte, L.; Bon, V.; Gruenker, R.; Klein, N.; Senkovska, I.; Kaskel, S.: “Structural diversity of cobalt(II) coordination compounds involving bent imidazole ligand: A route from 0D dimer to 3D coordination polymer”, Polyhedron (2012), 44(1), 179-186.

  • Schmidt, F.; Klemm, H.; Schoenfeld, K.; Gerds, A.; Hungerbach, W.; Van Lookeren Campagne, C. J.; Kaskel, S.: “Novel Composite Spherical Granulates with Catalytic Outer Layer and Improved Conversion Efficiency and Selectivity”, Chem. Eng. Technol. (2012), 35(4), 769-775.

  • Schmidt, F.; Paasch, S.; Brunner, E.; Kaskel, S.: “Carbon templated SAPO-34 with improved adsorption kinetics and catalytic performance in the MTO-reaction”, Microporous Mesoporous Mater. (2012), 164, 214-221.

  • Schneider, M.; Weiser, M.; Doerfler, S.; Althues, H.; Kaskel, S.; Michaelis, A.: “Electrodeposition of copper on aligned multi-walled carbon nanotubes”, Surf. Eng. (2012), 28(6), 435-441.

  • Senkovska, I.; Barea, E.; Navarro, J. A. R.; Kaskel, S.: “Adsorptive capturing and storing greenhouse gases such as sulfur hexafluoride and carbon tetrafluoride using metal-organic frameworks”, Microporous Mesoporous Mater. (2012), 156, 115-120.

  • Stoeck, U.; Krause, S.; Bon, V.; Senkovska, I.; Kaskel, S.: “A highly porous metal-organic framework, constructed from a cuboctahedral super-molecular building block, with exceptionally high methane uptake”, Chem. Commun. (Cambridge, U. K.) (2012), 48(88), 10841-10843.

  • Stoeck, U.; Nickerl, G.; Burkhardt, U.; Senkovska, I.; Kaskel, S.: “Modular construction of a porous organometallic network based on rhodium olefin complexation”, J. Am. Chem. Soc. (2012), 134(42), 17335-17337.

  • Wang, J.; Heerwig, A.; Lohe, M. R.; Oschatz, M.; Borchardt, L.; Kaskel, S.: “Fungi-based porous carbons for CO2 adsorption and separation”, J. Mater. Chem. (2012), 22(28), 13911-13913.

  • Wang, J.; Kaskel, S.: “KOH activation of carbon-based materials for energy storage”, J. Mater. Chem. (2012), 22(45), 23710-23725.

  • Wang, J.; Oschatz, M.; Biemelt, T.; Borchardt, L.; Senkovska, I.; Lohe, M. R.; Kaskel, S.: “Synthesis, characterization, and hydrogen storage capacities of hierarchical porous carbide derived carbon monolith”, J. Mater. Chem. (2012), 22(45), 23893-23899.

  • Wee, L. H.; Lohe, M. R.; Janssens, N.; Kaskel, S.; Martens, J. A.: “Fine tuning of the metal-organic framework Cu3(BTC)2 HKUST-1 crystal size in the 100 nm to 5 micron range”, J. Mater. Chem. (2012), 22(27), 13742-13746.

  • Wollmann, P.; Leistner, M.; Graehlert, W.; Throl, O.; Dreisbach, F.; Kaskel, S.: “Infrasorb: Optical detection of the heat of adsorption for high throughput adsorption screening of porous solids”, Microporous Mesoporous Mater. (2012), 149(1), 86-94.

  • Wollmann, P.; Schumm, B.; Kaskel, S.: “Transparent thin films of Bi2WO6, Bi4Ti3O12 and Sr0.75Ba0.25Nb2O6”, Solid State Sci. (2012), 14(9), 1378-1384.

  • 2011

  • Borchardt, L.; Oschatz, M.; Frind, R.; Kockrick, E.; Lohe, M. R.; Hauser, C. P.; Weiss, C. K.; Landfester, K.; Buchner, B.; Kaskel, S.: “Ceria/silicon carbide core-shell materials prepared by miniemulsion technique”, Beilstein J. Nanotechnol. (2011), 2, 638-44.

  • Doerfler, S.; Meier, A.; Thieme, S.; Nemeth, P.; Althues, H.; Kaskel, S.: “Wet-chemical catalyst deposition for scalable synthesis of vertical aligned carbon nanotubes on metal substrates”, Chem. Phys. Lett. (2011), 511(4-6), 288-293.

  • Frind, R.; Oschatz, M.; Kaskel, S.: “Polymerization of polycarbosilanes in high internal phase emulsions for the synthesis of macroporous silicon carbide catalysts (polyHIPE-SiC)”, J. Mater. Chem. (2011), 21(32), 11936-11940.

  • Fritsch, J.; Mansfeld, D.; Mehring, M.; Wursche, R.; Grothe, J.; Kaskel, S.: “Refractive index tuning of highly transparent bismuth containing polymer composites”, Polymer (2011), 52(15), 3263-3268.

  • Gedrich, K.; Heitbaum, M.; Notzon, A.; Senkovska, I.; Froehlich, R.; Getzschmann, J.; Mueller, U.; Glorius, F.; Kaskel, S.: “A Family of Chiral Metal-Organic Frameworks”, Chem. – Eur. J. (2011), 17(7), 2099-2106, S2099/1-S2099/40.

  • Grigas, A.; Kaskel, S.: “Synthesis of LiNbO3 nanoparticles in a mesoporous matrix”, Beilstein J. Nanotechnol. (2011), 2, 28-33.

  • Gruenker, R.; Senkovska, I.; Biedermann, R.; Klein, N.; Lohe, M. R.; Müller, P.; Kaskel, S.: “A highly porous flexible Metal-Organic Framework with corundum topology”, Chem. Commun. (Cambridge, U. K.) (2011), 47(1), 490-2.

  • Hauptvogel, I. M.; Biedermann, R.; Klein, N.; Senkovska, I.; Cadiau, A.; Wallacher, D.; Feyerherm, R.; Kaskel, S.: “Flexible and hydrophobic Zn-based metal-organic framework”, Inorg. Chem. (2011), 50(17), 8367-74.

  • Henschel, A.; Senkovska, I.; Kaskel, S.: “Liquid-phase adsorption on metal-organic frameworks”, Adsorption (2011), 17(1), 219-226.

  • Hoffmann, H. C; Assfour, B.; Epperlein, F.; Klein, N.; Paasch, S.; Senkovska, I.; Kaskel, S.; Seifert, G.; Brunner, E.: “High-pressure in situ 129Xe NMR spectroscopy and computer simulations of breathing transitions in the metal-organic framework Ni2(2,6-ndc)2(dabco) (DUT-8(Ni))”, J. Am. Chem. Soc. (2011), 133(22), 8681-90.

  • Klein, N.; Senkovska, I.; Baburin, I. A.; Gruenker, R.; Stoeck, U.; Schlichtenmayer, M.; Streppel, B.; Mueller, U.; Leoni, S.; Hirscher, M.; Kaskel, S.: “Route to a family of robust, non-interpenetrated metal-organic frameworks with pto-like topology”, Chem. - Eur. J. (2011), 13007-13016, S13007/1-S13007/9.

  • Kockrick, E.; Borchardt, L.; Schrage, C.; Gaudillere, C.; Ziegler, C.; Freudenberg, T.; Farrusseng, D.; Eychmuller, A.; Kaskel, S.: “CeO2/Pt catalyst nanoparticle containing carbide-derived carbon composites by a new in situ functionalization strategy”, Chem. Mater. (2011), 23(1), 57-66.

  • Krause, J.; Schrage, C.; Schuy, A.; Woike, T.; Kockrick, E.; Kaskel, S.; Schaniel, D.: “Effect of synthesis conditions on porous structure, luminescence and absorption properties of dye-loaded silica xerogels”, Microporous Mesoporous Mater. (2011), 142(1), 245-250.

  • Lesnyak, V.; Wolf, A.; Dubavik, A.; Borchardt, L.; Voitekhovich, S. V.; Gaponik, N.; Kaskel, S.; Eychmuller, A.: “3D assembly of semiconductor and metal nanocrystals: hybrid CdTe/Au structures with controlled content”, J. Am. Chem. Soc. (2011), 133(34), 13413-20.

  • Lohe, M. R.; Gedrich, K.; Freudenberg, T.; Kockrick, E.; Dellmann, T.; Kaskel, S.: “Heating and separation using nanomagnet-functionalized metal-organic frameworks”, Chem. Commun. (Cambridge, U. K.) (2011), 47(11), 3075-3077.

  • Montoro, C.; Linares, F.; Quartapelle Procopio, E.; Senkovska, I.; Kaskel, S.; Galli, S.; Masciocchi, N.; Barea, E.; Navarro, J. A. R.: “Capture of Nerve Agents and Mustard Gas Analogues by Hydrophobic Robust MOF-5 Type Metal-Organic Frameworks”, J. Am. Chem. Soc. (2011), 133(31), 11888-11891.

  • Nabih, N.; Schiller, R.; Lieberwirth, I.; Kockrick, E.; Frind, R.; Kaskel, S.; Weiss, C. K.; Landfester, K.: “Mesoporous CeO2 nanoparticles synthesized by an inverse miniemulsion technique and their catalytic properties in methane oxidation”, Nanotechnology (2011), 22(13), 135606/1-135606/11.

  • Nickerl, G.; Henschel, A.; Gruenker, R.; Gedrich, K.; Kaskel, S.: “Chiral Metal-Organic Frameworks and Their Application in Asymmetric Catalysis and Stereoselective Separation”, Chem. Ing. Tech. (2011), 83(1-2), 90-103.

  • Padmanaban, M.; Mueller, P.; Lieder, C.; Gedrich, K.; Gruenker, R.; Bon, V.; Senkovska, I.; Baumgartner, S.; Opelt, S.; Paasch, S.; Brunner, E.; Glorius, F.; Klemm, E.; Kaskel, S..: “Application of a chiral metal-organic framework in enantioselective separation”, Chem. Commun. (Cambridge, U. K.) (2011), 47(44), 12089-91.

  • Ritter, N.; Senkovska, I.; Kaskel, S.; Weber, J.: “Intrinsically Microporous Poly(imide)s: Structure-Porosity Relationship Studied by Gas Sorption and X-ray Scattering”, Macromolecules (Washington, DC, U. S.) (2011), 44(7), 2025-2033.

  • Ritter, N.; Senkovska, I.; Kaskel, S.; Weber, J.: “Towards chiral microporous soluble polymers-binaphthalene-based polyimides”, Macromol. Rapid Commun. (2011), 32(5), 438-443.

  • Rose, M.; Boehringer, B.; Jolly, M.; Fischer, R.; Kaskel, S.: “MOF Processing by Electrospinning for Functional Textiles”, Adv. Eng. Mater. (2011), 13(4), 356-360.

  • Rose, M.; Klein, N.; Senkovska, I.; Schrage, C.; Wollmann, P.; Boehlmann, W.; Boehringer, B.; Fichtner, S.; Kaskel, S.: “A new route to porous monolithic organic frameworks via cyclotrimerization”, J. Mater. Chem. (2011), 21(3), 711-716.

  • Rose, M.; Korenblit, Y.; Kockrick, E.; Borchardt, L.; Oschatz, M.; Kaskel, S.; Yushin, G.: “Hierarchical Micro- and Mesoporous Carbide-Derived Carbon as a High-Performance Electrode Material in Supercapacitors”, Small (2011), 7(8), 1108-1117.

  • Rose, M.; Notzon, A.; Heitbaum, M.; Nickerl, G.; Paasch, S.; Brunner, E.; Glorius, F.; Kaskel, S.: “N-Heterocyclic carbene containing element organic frameworks as heterogeneous organocatalysts”, Chem. Commun. (Cambridge, U. K.) (2011), 47(16), 4814-4816.

  • Schumm, B.; Wollmann, P.; Fritsch, J.; Grothe, J.; Kaskel, S.: “Nanoimprint patterning of thin cadmium stannate films using a polymeric precursor route”, J. Mater. Chem. (2011), 21(29), 10697-10704.

  • Schwab, M. G.; Lennert, A.; Pahnke, J.; Jonschker, G.; Koch, M.; Senkovska, I.; Rehahn, M.; Kaskel, S.: “Nanoporous copolymer networks through multiple Friedel-Crafts-alkylation-studies on hydrogen and methane storage”, J. Mater. Chem. (2011), 21(7), 2131-2135.

  • Sharma, M. K.; Senkovska, I.; Kaskel, S.; Bharadwaj, P. K.: “Three-Dimensional Porous Cd(II) Coordination Polymer with Large One-Dimensional Hexagonal Channels: High Pressure CH4 and H2 Adsorption Studies”, Inorg. Chem. (2011), 50(2), 539-544.

  • Vennekamp, M.; Bauer, I.; Groh, M.; Sperling, E.; Ueberlein, S.; Myndyk, M.; Mader, G.; Kaskel, S.: “Formation of SiC nanoparticles in an atmospheric microwave plasma”, Beilstein J. Nanotechnol. (2011), 2, 665-73.

  • Wollmann, P; Grothe, J; Ziegler, C; Kaskel, S.: “Highly transparent Bi2MoO6- and Bi2WO6-polymer nanocomposites”, J. Nanosci. Nanotechnol. (2011), 11(4), 3464-9.

  • Wollmann, P.; Leistner, M.; Stoeck, U.; Gruenker, R.; Gedrich, K.; Klein, N.; Throl, O.; Graehlert, W.; Senkovska, I.; Dreisbach, F.; Kaskel, S.: “High-throughput screening: speeding up porous materials discovery”, Chem. Commun. (Cambridge, U. K.) (2011), 47(18), 5151-5153.

  • Wu, C.; Miron, R.; Sculean, A.; Kaskel, S.; Doert, T.; Schulze, R.; Zhang, Y.: “Proliferation, differentiation and gene expression of osteoblasts in boron-containing associated with dexamethasone deliver from mesoporous bioactive glass scaffolds”, Biomaterials (2011), 32(29), 7068-78.

  • Zhu, Y.; Fang, Y.; Borchardt, L.; Kaskel, S.: “PEGylated hollow mesoporous silica nanoparticles as potential drug delivery vehicles”, Microporous Mesoporous Mater. (2011), 141(1-3), 199-206.

  • 2010

  • Debatin, F.; Thomas, A.; Kelling, A.; Hedin, N.; Bacsik, Z.; Senkovska, I.; Kaskel, S.; Junginger, M.; Muller, H.; Schilde, U.; Jager, C.; Friedrich, A.; Holdt, H.-J.: “In situ synthesis of an imidazolate-4-amide-5-imidate ligand and formation of a microporous zinc-organic framework with H2- and CO2-storage ability”, Angew. Chem., Int. Ed. (2010), 49(7), 1258-62.

  • Fritsch, J.; Rose, M.; Wollmann, P.; Boehlmann, W.; Kaskel, S.: “New element organic frameworks based on Sn, Sb, and Bi, with permanent porosity and high catalytic activity”, Materials (2010), 3(4), 2447-2462.

  • Gedrich, K.; Senkovska, I.; Baburin, I. A.; Mueller, U.; Trapp, O.; Kaskel, S.: “New Chiral and Flexible Metal-Organic Framework with a Bifunctional Spiro Linker and Zn4O-Nodes”, Inorg. Chem. (2010), 49(10), 4440-4446.

  • Gedrich, K.; Senkovska, I.; Klein, N.; Stoeck, U.; Henschel, A.; Lohe, M. R.; Baburin, I. A.; Mueller, U.; Kaskel, S.: “A Highly Porous Metal-Organic Framework with Open Nickel Sites”, Angew. Chem., Int. Ed. (2010), 49(45), 8489-8492, S8489/1-S8489/14.

  • Getzschmann, J.; Senkovska, I.; Wallacher, D.; Tovar, M.; Fairen-Jimenez, D.; Dueren, T.; van Baten, J. M.; Krishna, R.; Kaskel, S.: “Methane storage mechanism in the metal-organic framework Cu3(btc)2: An in situ neutron diffraction study”, Microporous Mesoporous Mater. (2010), 136(1-3), 50-58.

  • Gruenker, R.; Senkovska, I.; Biedermann, R.; Klein, N.; Klausch, A.; Baburin, I. A.; Mueller, U.; Kaskel, S.: “Topological Diversity, Adsorption and Fluorescence Properties of MOFs Based on a Tetracarboxylate Ligand”, Eur. J. Inorg. Chem. (2010), (24), 3835-3841.

  • Kaskel, S.: “Metal-Organic Frameworks”, Angew. Chem., Int. Ed. (2010), 49(50), 9565.

  • Kaskel, S.: “Metal-Organic Frameworks (MOFs)”, Chem. Ing. Tech. (2010), 82(7), 1019-1023.

  • Kaskel, S.; Borchardt, L.; Kockrick, E.; Wollmann, P.; Guron, M. M.; Sneddon, L. G.; Geiger, D.: “Ordered Mesoporous Boron Carbide Based Materials via Precursor Nanocasting”, Chem. Mater. (2010), 22(16), 4660-4668.

  • Klausch, A.; Althues, H.; Schrage, C.; Simon, P.; Szatkowski, A.; Bredol, M.; Adam, D.; Kaskel, S.: “Preparation of luminescent ZnS:Cu nanoparticles for the functionalization of transparent acrylate polymers”, J. Lumin. (2010), 130(4), 692-697.

  • Klein, N.; Henschel, A.; Kaskel, S.: “n-Butane adsorption on Cu3(btc)2 and MIL-101”, Microporous Mesoporous Mater. (2010), 129(1-2), 238-242.

  • Klein, N.; Herzog, C.; Sabo, M.; Senkovska, I.; Getzschmann, J.; Paasch, S.; Lohe, M. R.; Brunner, E.; Kaskel, S.: “Monitoring adsorption-induced switching by 129Xe NMR spectroscopy in a new metal-organic framework Ni2(2,6-ndc)2(dabco)”, Phys. Chem. Chem. Phys. (2010), 12(37), 11778-11784.

  • Kockrick, E.; Schmidt, F.; Gedrich, K.; Rose, M.; George, T. A.; Skomski, R.; Kaskel, S.: “Mesoporous Ferromagnetic MPt@Silica/Carbon (M = Fe, Co, Ni) Composites As Advanced Bifunctional Catalysts”, Chem. Mater. (2010), 22(5), 1624-1632.

  • Kockrick, E.; Schrage, C.; Borchardt, L.; Klein, N.; Rose, M.; Senkovska, I.; Kaskel, S.: “Ordered mesoporous carbide derived carbons for high pressure gas storage”, Carbon (2010), 48(6), 1707-1717.

  • Korenblit, Y.; Rose, M.; Kockrick, E.; Borchardt, L.; Kvit, A.; Kaskel, S.; Yushin, G.: “High-Rate Electrochemical Capacitors Based on Ordered Mesoporous Silicon Carbide-Derived Carbon”, ACS Nano (2010), 4(3), 1337-1344.

  • Kuesgens, P.; Zgaverdea, A.; Fritz, H.-G.; Siegle, S.; Kaskel, S.: “Metal-Organic Frameworks in monolithic structures”, J. Am. Ceram. Soc. (2010), 93(9), 2476-2479.

  • Oschatz, M.; Kockrick, E.; Rose, M.; Borchardt, L.; Klein, N.; Senkovska, I.; Freudenberg, T.; Korenblit, Y.; Yushin, G.; Kaskel, S.: “A cubic ordered, mesoporous carbide-derived carbon for gas and energy storage applications”, Carbon (2010), 48(14), 3987-3992.

  • Portehault, D.; Giordano, C.; Gervais, C.; Senkovska, I.; Kaskel, S.; Sanchez, C.; Antonietti, M.: “High-Surface-Area Nanoporous Boron Carbon Nitrides for Hydrogen Storage”, Adv. Funct. Mater. (2010), 20(11), 1827-1833.

  • Rose, M.; Klein, N.; Boehlmann, W.; Boehringer, B.; Fichtner, S.; Kaskel, S.: “New element organic frameworks via Suzuki coupling with high adsorption capacity for hydrophobic molecules”, Soft Matter (2010), 6(16), 3918-3923.

  • Schrage, C.; Althues, H.; Klausch, A.; Adam, D.; Kaskel, S.: “ZnS:Cu polymer nanocomposites for thin film electroluminescent devices”, J. Nanosci. Nanotechnol. (2010), 10(7), 4335-4340.

  • Schrage, C.; Kockrick, E.; Kaskel, S.: “Synthesis and catalytic application of ceria nanoparticles and ceria-SiC composites”, Mater. Res. Soc. Symp. Proc. (2010), 1217 (Catalytic Materials for Energy, Green Processes and Nanotechnology), No pp. given, Paper #: 1217-Y09-07.

  • Schumm, B.; Althues, H.; Kaskel, S.: “CdTe nanoparticles for the deposition of CdTe films using close spaced sublimation”, J. Cryst. Growth (2010), 312(16-17), 2449-2453.

  • Wriedt, S.; Kaskel, S: “Transparent magnesium hydroxide/acrylate nanocomposite films”, J. Appl. Polym. Sci. (2010), 116(4), 2197-2204.

  • Zhu, Y.; Fang, Y.; Kaskel, S.: “Folate-Conjugated Fe3O4@SiO2 Hollow Mesoporous Spheres for Targeted Anticancer Drug Delivery”, J. Phys. Chem. C (2010), 114(39), 16382-16388.

  • Zhu, Y.; Kaskel, S.: “Synthesis and in vitro release of gentamicin from CaMCM-41/PLLA composite microspheres”, Ceram. Trans. (2010), 210 (Ceramic Materials and Components for Energy and Environmental Applications), 79-84.

  • Zhu, Y.; Ikoma, T.; Hanagata, N.; Kaskel, S.: “Rattle-type Fe3O4@SiO2 hollow mesoporous spheres as carriers for drug delivery”, Small (2010), 6(3), 471-8.

  • 2009

  • Althues, H.; Poetschke, P.; Kim, G.-M.; Kaskel, S. “Structure and mechanical properties of transparent ZnO/PBDMA nanocomposites”, J. Nanosci. Nanotechnol. (2009), 9(4), 2739-2745.

  • Bigall, N. C.; Herrmann, A.-K.; Vogel, M.; Rose, M.; Simon, P.; Carrillo-Cabrera, W.; Dorfs, D.; Kaskel, S.; Gaponik, N.; Eychmueller, A.: “Hydrogels and Aerogels from Noble Metal Nanoparticles”, Angew. Chem., Int. Ed. (2009), 48(51), 9731-9734, S9731/1-S9731/10.

  • Biswas, S.; Grzywa, M.; Nayek, H. P.; Dehnen, S.; Senkovska, I.; Kaskel, S.; Volkmer, D. “A cubic coordination framework constructed from benzobistriazolate ligands and zinc ions having selective gas sorption properties”, Dalton Trans. (2009), (33), 6487-6495.

  • Dani, I.; Maeder, G.; Roch, J.; Grabau, P.; Dresler, B.; Linaschke, D.; Tschoecke, S.; Kaskel, S.; Beyer, E.: “Equipment for large area plasma processing at atmospheric pressure”, Annu. Tech. Conf. Proc. – Soc. Vac. Coaters (2009), 52nd, 320-323.

  • Dani, I.; Maeder, G.; Grabau, P.; Dresler, B.; Linaschke, D.; Lopez, E.; Kaskel, S.; Beyer, E.: “Atmospheric-pressure plasmas for solar cell manufacturing”, Contrib. Plasma Phys. (2009), 49(9), 662-670.

  • Doerfler, S.; Meier, A.; Althues, H.; Dani, I.; Kaskel, S.: “Vertical aligned carbon nanotube deposition on metallic substrates by CVD”, ECS Trans. (2009), 25(8, EuroCVD 17/CVD 17), 1047-1051.

  • Du, H.; Tang, L.; Kaskel, S.: “Preparation, Microstructure, and Ferroelectric Properties of Bi3.25La0.75Ti3-xMxO12 (M = Mo, W, Nb, V) Ceramics”, J. Phys. Chem. C (2009), 113(4), 1329-1339.

  • Klein, N.; Senkovska, I.; Gedrich, K.; Stoeck, U.; Henschel, A.; Mueller, U.; Kaskel, S.: “A Mesoporous Metal-Organic Framework”, Angew. Chem., Int. Ed. (2009), 48(52), 9954-9957, S9954/1-S9954/6.

  • Kockrick, E.; Frind, R.; Rose, M.; Petasch, U.; Boehlmann, W.; Geiger, D.; Herrmann, M.; Kaskel, S.: “Platinum induced crosslinking of polycarbosilanes for the formation of highly porous CeO2/silicon oxycarbide catalysts”, J. Mater. Chem. (2009), 19(11), 1543-1553.

  • Krawiec, P.; Kaskel, S.: “Transition metal nitrides and carbides”, Nanoscale Mater. Chem. (2nd Ed.) (2009), 111-125.

  • Krawiec, P.; Kaskel, S.: “Ordered Mesoporous Silica (OMS) Supported Vanadium Nitride and Carbide Catalysts”, Top. Catal. (2009), 52(11), 1549-1558.

  • Krawiec, P.; Kockrick, E.; Borchardt, L.; Geiger, D.; Corma, A.; Kaskel, S.: “Ordered Mesoporous Carbide Derived Carbons: Novel Materials for Catalysis and Adsorption”, J. Phys. Chem. C (2009), 113(18), 7755-7761.

  • Kuesgens, P.; Rose, M.; Senkovska, I.; Froede, H.; Henschel, A.; Siegle, S.; Kaskel, S.: “Characterization of metal-organic frameworks by water adsorption”, Microporous Mesoporous Mater. (2009), 120(3), 325-330.

  • Kuesgens, P.; Siegle, S. Kaskel, S.: “Crystal growth of the metal-organic framework Cu3(BTC)2 on the surface of pulp fibers”, Adv. Eng. Mater. (2009), 11(1-2), 93-95.

  • Linaschke, D.; Leistner, M.; Grabau, P.; Maeder, G.; Graehlert, W.; Dani, I.; Kaskel, S.; Beyer, E.: “In-line plasma-chemical etching of crystalline silicon solar wafers at atmospheric pressure”, IEEE Trans. Plasma Sci. (2009), 37(6, Pt. 1), 979-984.

  • Lohe, M. R.; Rose, M.; Kaskel, S.: “Metal-Organic Framework (MOF) aerogels with high micro- and macroporosity”, Chem. Commun. (Cambridge, U. K.) (2009), (40), 6056-6058.

  • Ritter, N.; Antonietti, M.; Thomas, A.; Senkovska, I.; Kaskel, S.; Weber, J.: “Binaphthalene-Based, Soluble Polyimides: The Limits of Intrinsic Microporosity”, Macromolecules (Washington, DC, U. S.) (2009), 42(21), 8017-8020.

  • Rose, M.; Kockrick, E.; Senkovska, I.; Kaskel, S.: “High surface area carbide-derived carbon fibers produced by electrospinning of polycarbosilane precursors”, Carbon (2009), Volume Date 2010, 48(2), 403-407.

  • Schrage, C.; Kaskel, S.: “Flexible and Transparent SWCNT Electrodes for Alternating Current Electroluminescence Devices”, ACS Appl. Mater. Interfaces (2009), 1(8), 1640-1644.

  • Schwab, M. G.; Senkovska, I.; Rose, M.; Klein, N.; Koch, M.; Pahnke, J.; Jonschker, G.; Schmitz, B.; Hirscher, M.; Kaskel, S.: “High surface area polyHIPEs with hierarchical pore system”, Soft Matter (2009), 5(5), 1055-1059.

  • Senkovska, I.; Hoffmann, F.; Froeba, M.; Getzschmann, J.; Boehlmann, W.; Kaskel, S.: “New highly porous aluminium based metal-organic frameworks: Al(OH)(ndc) (ndc=2,6-naphthalene dicarboxylate) and Al(OH)(bpdc) (bpdc=4,4'-biphenyl dicarboxylate”, Microporous Mesoporous Mater. (2009), 122(1-3), 93-98.

  • Spange, S.; Kempe, P.; Seifert, A.; Auer, A. A.; Ecorchard, P.; Lang, H.; Falke, M.; Hietschold, M.; Pohlers, A.; Hoyer, W.; Cox, G.; Kockrick, E.; Kaskel, S.: “Nanocomposites with Structure Domains of 0.5 to 3 nm by Polymerization of Silicon Spiro Compounds”, Angew. Chem., Int. Ed. (2009), 48(44), 8254-8258, S8254/1-S8254/21.

  • Wollmann, P.; Grothe, J.; Kaskel, S.: “Synthesis of Bi2Ti2O7-, Bi2MoO6- and Bi2WO6- photocatalysts with high activity”, Curr. Top. Catal. (2009), 8, 73-79.

  • Zhu, Y.; Kaskel, S.: “Comparison of the in vitro bioactivity and drug release property of mesoporous bioactive glasses (MBGs) and bioactive glasses (BGs) scaffolds”, Microporous Mesoporous Mater. (2009), 118(1-3).

  • Zhu, Y.; Kaskel, S.; Ikoma, T.; Hanagata, N.: “Magnetic SBA- 15/poly(N-isopropylacrylamide) composite: Preparation, characterization and temperature- responsive drug release property”, Microporous Mesoporous Mater. (2009), 123(1-3), 107-112.

  • Zhu, Y.; Kockrick, E.; Ikoma, T.; Hanagata, N.; Kaskel, S.: “An Efficient Route to Rattle-Type Fe3O4@SiO2 Hollow Mesoporous Spheres Using Colloidal Carbon Spheres Templates”, Chem. Mater. (2009), 21(12), 2547- 2553.

  • Zhu, Y.; Kockrick, E.; Kaskel, S.; Ikoma, T.; Hanagata, N.: “Nanocasting Route to Ordered Mesoporous Carbon with FePt Nanoparticles and Its Phenol Adsorption Property”, J. Phys. Chem. C (2009), 113(15), 5998- 6002.

  • 2008

  • Althues, H.; Kaskel, S.: “Intelligent energy saving with little helpers - photonics”, Kunststoffe (2008), 98(9), 134-137.

  • Henschel, A.; Gedrich, K.; Kraehnert, R.; Kaskel, S.: “Catalytic properties of MIL-101”, Chem. Commun. (Cambridge, U. K.) (2008), (35), 4192-4194.

  • Kockrick, E.; Krawiec, P.; Petasch, U.; Martin, H.-P.; Herrmann, M.; Kaskel, S.: “Porous CeOX/SiC Nanocomposites Prepared from Reverse Polycarbosilane-Based Microemulsions”, Chem. Mater. (2008), 20(1), 77-83.

  • Kockrick, E.; Schrage, C.; Grigas, A.; Geiger, D.; Kaskel, S.: “Synthetic and catalytic properties of microemulsion-derived cerium oxide nanoparticles”, J. Solid State Chem. (2008), 181(7), 1614-1620.

  • Krawiec, P.; Narayan Panda, R.; Kockrick, E.; Geiger, D.; Kaskel, S.: “High surface area V-Mo-N materials synthesized from amine intercalated foams”, J. Solid State Chem. (2008), 181(4), 935-942.

  • Krawiec, P.; Schrage, C.; Kockrick, E.; Kaskel, S.: “Tubular and Rodlike Ordered Mesoporous Silicon (Oxy)carbide Ceramics and their Structural Transformations”, Chem. Mater. (2008), 20(16), 5421-5433.

  • Laguta, V. V.; Bykov, I. P.; Yurchenko, L. P.; Blinc, R.; Wohlrab, S.; Suchaneck, G.; Kaskel, S: “Magnetic resonance and local properties of BiFeO3 and Ni2MnGa layers”, Ferroelectrics (2008), 370 153-155.

  • Lopez, E.; Dresler, B.; Maeder, G.; Dani, I.; Hopfe, V.; Kaskel, S.; Heintze, M.; Moeller, R.; Wanka, H.; Kirschmann, M.; Frenck, J.; Poruba, A.; Barinka, R.; Dahl, R.; Nussbaumer, H.: “Plasma enhanced CVD and plasma chemical etching at atmospheric pressure for continuous processing of crystalline silicon solar wafers”, Annu. Tech. Conf. Proc. – Soc. Vac. Coaters (2008), 51st 622-626.

  • Opelt, S.; Tuerk, S.; Dietzsch, E.; Henschel, A.; Kaskel, S.; Klemm, E.: “Preparation of palladium supported on MOF-5 and its use as hydrogenation catalyst”, Catal. Commun. (2008), 9(6), 1286-1290.

  • Rose, M.; Bohlmann, W.; Sabo, M.; Kaskel, S.: “Element-organic frameworks with high permanent porosity”, Chem. Commun. (Cambridge, U. K.) (2008), (21), 2462-4.

  • Scholz, S; Kaskel, S.: “Surface functionalization of ZrO2 nanocrystallites for the integration into acrylate nanocomposite films”, J. Colloid Interface Sci. (2008), 323(1), 84-91.

  • Schwab, M. G.; Senkovska, I.; Rose, M.; Koch, M.; Pahnke, J.; Jonschker, G.; Kaskel, S.: “MOF @ polyHIPEs”, Adv. Eng. Mater. (2008), 10(12), 1151-1155.

  • Senkovska, I.; Kaskel, S.: “High pressure methane adsorption in the metal-organic frameworks Cu3(btc)2, Zn2(bdc)2dabco, and Cr3F(H2O)2O(bdc)3”, Microporous Mesoporous Mater. (2008), 112(1-3), 108-115.

  • Wang, H.; Getzschmann, J.; Senkovska, I.; Kaskel, S.: “Structural transformation and high pressure methane adsorption of Co2(1,4-bdc)2dabco”, Microporous Mesoporous Mater. (2008), 116(1-3), 653-657.

  • Wohlrab, S.; Du, H.; Weiss, M.; Kaskel, S.: “Foam-derived multiferroic BiFeO3 nanoparticles and integration into transparent polymer nanocomposites”, J. Exp. Nanosci. (2008), 3(1), 1-15.

  • Zhu, Y.; Wu, C.; Ramaswamy, Y.; Kockrick, E.; Simon, P.; Kaskel, S.; Zreiqat, H.: “Preparation, characterization and in vitro bioactivity of mesoporous bioactive glasses (MBGs) scaffolds for bone tissue engineering”, Microporous Mesoporous Mater. (2008), 112(1-3), 494-503.

  • Zhu, Y.; Zhang, L.; Schappacher, F. M.; Pottgen, R.; Shi, J.; Kaskel, S.: “Synthesis of Magnetically Separable Porous Carbon Microspheres and Their Adsorption Properties of Phenol and Nitrobenzene from Aqueous Solution”, J. Phys. Chem. C (2008), 112(23).

  • 2007

  • Althues, H.; Henle, J.; Kaskel, S.: “Functional inorganic nanofillers for transparent polymers”, Chem. Soc. Rev. (2007), 36(9), 1454-1465.

  • Althues, H.; Simon, P.; Kaskel, S.: “Transparent and luminescent YVO4:Eu/polymer nanocomposites prepared by in situ polymerization”, J. Mater. Chem. (2007), 17(8), 758-765.

  • Boehlmann, W.; Kaskel, S.; Sabo, M.; Hunger, J.: “Characterization of the microporosity of different metal-organic frameworks using 129Xe NMR spectroscopy”, Stud. Surf. Sci. Catal. (2007), 170B (From Zeolites to Porous MOF Materials), 2030-2036.

  • Di Gianni, A.; Trabelsi, S.; Rizza, G.; Sangermano, M.; Althues, H.; Kaskel, S.; Voit, B.: “Hyperbranched polymer/TiO2 hybrid nanoparticles synthesized via an in situ sol-gel process”, Macromol. Chem. Phys. (2007), 208(1), 76-86.

  • Du, H.; Wohlrab, S.; Kaskel, S.: “Synthesis, Structure, and Properties of Bi3.25Pr0.75Ti2.97V0.03O12 Ferroelectric Ceramics”, J. Phys. Chem. C (2007), 111(29), 11095-11103.

  • Du, H.; Wohlrab, S.; Weiss, M.; Kaskel, S.: “Preparation of BaTiO3 nanocrystals using a two-phase solvothermal method”, J. Mater. Chem. (2007), 17(43), 4605-4610.

  • Henle, J.; Kaskel, S.: “Preparation of photochromic transparent BiOX (X = Cl, I)/PLA nanocomposite materials via microemulsion polymerization”, J. Mater. Chem. (2007), 17(47), 4964-4971.

  • Henle, J.; Simon, P.; Frenzel, A.; Scholz, S.; Kaskel, S.: “Nanosized BiOX (X = Cl, Br, I) Particles Synthesized in Reverse Microemulsions”, Chem. Mater. (2007), 19(3), 366-373.

  • Kaskel, S.: “Modular design of porous materials”, Wiss. Z. Tech. Univ. Dresden (2007), 56(1-2), 77-80.

  • Kaskel, S.; Krawiec, P.: “Ordered mesoporous silicon carbide”, Stud. Surf. Sci. Catal. (2007), 170B (From Zeolites to Porous MOF Materials), 1770-1773.

  • Kockrick, E.; Krawiec, P.; Schnelle, W.; Geiger, D.; Schappacher, F. M.; Poettgen, R.; Kaskel, S.: “Space-confined formation of FePt nanoparticles in ordered mesoporous silica SBA-15”, Adv. Mater. (Weinheim, Ger.) (2007), 19(19), 3021-3026.

  • Kuhn, A.; Martin-Gil, M.; Kaskel, S.; Straehle, J.; Garcia-Alvarado, F.: “The effect of cationic disordering on the electrochemical performances of the layered nitrides LiWN2 and Li0.84W1.16N2”, J. Eur. Ceram. Soc. (2007), 27(13-15), 4199-4203.

  • Sabo, M.; Henschel, A.; Froede, H.; Klemm, E.; Kaskel, S.: “Solution infiltration of palladium into MOF-5: synthesis, physisorption and catalytic properties”, J. Mater. Chem. (2007), 17(36), 3827-3832.

  • Scholz, S.; Althues, H.; Kaskel, S.: “Growth of silica nanoparticles in methylmethacrylate-based water-in-oil microemulsions”, Colloid Polym. Sci. (2007), 285(15).

  • Senkovska, I.; Fritsch, J.; Kaskel, S.: “New polymorphs of magnesium-based metal-organic frameworks Mg3(ndc)3 (ndc = 2,6-naphthalenedicarboxylate)”, Eur. J. Inorg. Chem. (2007), (35), 5475-5479.

  • Zhu, Y.; Kaskel, S.; Shi, J.; Wage, T.; van Pee, K.-H.: “Immobilization of Trametes versicolor Laccase on Magnetically Separable Mesoporous Silica Spheres”, Chem. Mater. (2007), 19(26), 6408-641.

  • 2006

  • Althues, H.; Palkovits, R.; Rumplecker, A.; Simon, P.; Sigle, W.; Bredol, M.; Kynast, U.; Kaskel, S.: “Synthesis and Characterization of transparent luminescent ZnS:Mn/PMMA Nanocomposites”, Chem. Mater. (2006), 18(4), 1068-1072.

  • Althues, H.; Simon, P.; Philipp, F.; Kaskel, S.: “Integration of Zinc Oxide Nanoparticles into Transparent Poly(butanediolmonoacrylate) via Photopolymerisation”, J. Nanosci. Nanotechnol. (2006), 6(2), 409-413.

  • Boehlmann, W.; Poeppl, A.; Sabo, M.; Kaskel, S.: “Characterization of the Metal-Organic Framework Compound Cu3(BTC)2 by means of 129Xe Nuclear Magnetic and Electron Paramagnetic Resonance Spectroscopy”, J. Phys. Chem. B (2006), 110(41), 20177-20181.

  • Du, H.; Wohlrab, S.; Kaskel, S.: “Synthesis of nanostructured bismuth titanate microspheres”, J. Nanosci. Nanotechnol. (2006), 6(7), 2110-2116.

  • Kaskel, S.: “Invisible helper. Transparent nanocomposites and hybrid materials”, Kunststoffe (2006), 96(6), 36-39.

  • Kramer, M.; Schwarz, U.; Kaskel, S.: “Synthesis and properties of the metal-organic framework Mo3(BTC)2 (TUDMOF-1)”, J. Mater. Chem. (2006), 16(23), 2245-2248.

  • Krawiec, P.; De Cola, P. L.; Gläser, R.; Weitkamp, J.; Weidenthaler, C.; Kaskel, S.: “Oxide Foams for the Synthesis of High Surface Area Vanadium Nitride Catalysts”, Adv. Mater. (2006), 18(4), 505-508.

  • Krawiec, P.; Geiger, D.; Kaskel, S.: “Ordered mesoporous silicon carbide (OM-SiC) via polymer precursor nanocasting”, Chem. Commun. (Cambridge, U. K.) (2006), (23) 2469-2470.

  • Krawiec, P.; Kaskel, S.: “Thermal stability of high surface area silicon carbide materials”, J. Solid State Chem. (2006), 179(8), 2281-2289.

  • Krawiec, P.; Kockrick, E.; Simon, P.; Auffermann, G.; Kaskel, S.: “Platinum-Catalyzed Template Removal for the in situ Synthesis of MCM-41 Supported Catalysts”, Chem. Mater. (2006), 18(11), 2663-2669.

  • Krawiec, P.; Kramer, M.; Sabo, M.; Kunschke, R.; Fröde, H.; Kaskel, S.: “Improved Hydrogen Storage in the Metal-Organic Framework Cu3(BTC)2”, Adv. Eng. Mater. (2006), 8(4), 293-296.

  • Palkovits, R.; Kaskel, S.: “Reverse micelle-mediated synthesis of zirconia with enhanced surface area using alcothermal treatment”, J. Mater. Chem. (2006), 16(4), 391-394.

  • Panda, R.; Kaskel, S.: “Synthesis and Characterization of High Surface Area Molybdenum Nitride”, J. Mater. Sci. (2006), 41(8), 2465-2470.

  • Sabo, M.; Boehlmann, W.; Kaskel, S.: “Titanium terephthalate (TT-1) hybrid materials with high specific surface area”, J. Mater. Chem. (2006), 16(24), 2354-2357.

  • Senkovska, I.; Kaskel, S.: “Solvent-induced pore-size adjustment in the metal-organic framework [Mg3(ndc)3(dmf)4] ndc = naphthalenedicarboxylate)”, Eur. J. Inorg. Chem. (2006), (22), 4564-4569.

  • Wohlrab, S.; Weiss, M.; Du, H.; Kaskel, S.: “Synthesis of MNbO3 Nanoparticles (M = Li, Na, K)”, Chem. Mater. (2006), 18(18), 4227-4230.

  • 2005

  • Kaskel, S.: “Poren per Baukasten”, Nachr. Chem. (2005), 53(4), 394-399.

  • Kaskel, S.; Chaplais, G.; Schlichte, K.: “Synthesis, Characterization, and Catalytic Properties of High-Surface-Area Aluminum Silicon Nitride Based Materials”, Chem. Mater. (2005), 17(1), 181-185.

  • Palkovits, R.; Althues, H.; Rumplecker, A.; Tesche, B.; Dreier, A.; Holle, U.; Fink, G.; Cheng, C. H.; Shantz, D. F.; Kaskel, S.: “Polymerization of w/o-Microemulsions for the Preparation of Transparent SiO2/PMMA-Nanocomposites”, Langmuir (2005), 21(13), 6048-6053.

  • 2004

  • Carr, C. S.; Kaskel, S.; Shantz, D. F.: “Self-Assembly of Colloidal Zeolite Precursors into Extended Hierarchically Ordered Solids”, Chem. Mater. (2004), 16(16), 3139-3146.

  • Chaplais, G.; Kaskel, S.: “Porosity Control in Pre-Ceramic Molecular Precursor-Derived GaN Based Materials”, J. Mater. Chem. (2004), 14(6), 1017-1025.

  • Kaskel, S.; Khanna, M.; Zibrowius, B.; Schmidt, H.-W.; Ullner, D.: “Crystal Growth in Supercritical Ammonia using High Surface Area Silicon Nitride Feedstock”, J. Cryst. Growth (2004), 261(1), 99-104.

  • Kaskel, S.; Schüth, F.; Stöcker, M.: “Metal-organic open frameworks (MOFs)”, Microporous Mesoporous Mater. (2004), 73, 1.

  • Krawiec, P.; Kaskel, S.: “SiC/MCM-48 and SiC/SBA-15 Nanocomposite Materials”, Chem. Mater. (2004), 16(15), 2869-2880.

  • Schlichte, K.; Kaskel, S.: “Catalytic Properties of High Surface Area Titanium Nitride Materials”, J. Mol. Catal. A (2004), 208(1-2), 291-298.

  • Schlichte, K.; Kratzke, T.; Kaskel, S.: “Improved Synthesis, Thermal Stability and Catalytic Properties of the Metal Organic Framework Cu3(BTC)2”, Microporous Mesoporous Mater. (2004), 73(1-2), 81-88.

  • 2003

  • Bogdanovic, B.; Felderhoff, M.; Kaskel, S.; Pommerin, A.; Schlichte, K.; Schüth, F.: “Improved Hydrogen Storage Properties of Ti-doped Sodium Alanate Using Nanoparticular Titanium Doping Agents”, Adv. Mater. (2003), 15(12), 1012-1015.

  • Chaplais, G.; Schlichte, K.; Stark, O.; Fischer, R.; Kaskel, S.: “Template Assisted Design of Microporous Gallium Nitride Materials”, Chem. Commun. (2003), (6), 730 - 731.

  • Kaskel, S.; Dong, Z.-C.; Klem, M. T.; Corbett, J. D.: “Synthesis and Structure of the Metallic K6Tl17 — A Layered Tetrahedral Star Structure Related to that of Cr3Si”, Inorg. Chem. (2003), 42(6), 1835-1841.

  • Kaskel, S.; Lehmann, C. W.; Chaplais, G.; Schlichte K.; Khanna, M.: “Synthesis, Structure and Characterization of [RAl(µ-NHEt)(µ-NEt)2Si(NHEt)]2 (R = Me, Et)”, Eur. J. Inorg. Chem. (2003), (6), 1193-1196.

  • Kaskel, S.; Schlichte, K.; Chaplais, G.; Khanna, M.: “Synthesis and Characterization of Titanium Nitride Based Nanoparticles”, J. Mater. Chem. (2003), 13(6), 1496-1499.

  • 2002

  • Althues, H.; Kaskel, S.: “Sulfated Zirconia Nanoparticles synthesized in Reverse Microemulsions – Preparation and Catalytic Properties”, Langmuir (2002), 18(20), 7428-7435.

  • Kaskel, S.; Khanna, M.; Schlichte, K.; Chaplais, G.: “Ammonothermal Transformation of High Surface Area Silicon Nitride”, Z. Anorg. Allg. Chem. (2002), 9-10, 2148.

  • Kaskel, S.; Klem, M. T.; Corbett, J. D.: “Polyatomic Clusters of the Triel Elements. Palladium-Centered Clusters of Thallium in A8Tl11Pd, A= Cs, Rb, K”, Inorg. Chem. (2002), 41(13), 3457-3462.

  • Kaskel, S.; Schlichte, K.; Zibrowius, B.: “Pore Size Engineering of Mesoporous Silicon Nitride Materials”, Phys. Chem. Chem. Phys. (2002), 4(9), 1675-1681.

  • 2001

  • Farrusseng, D.; Schlichte, K.; Spliethoff, B.; Wingen, A.; Kaskel, S.; Bradley, J. S.; Schüth, F.: “Mikroporöses Siliciumnitridimid: Steuerung der Porengröße und katalytische Eigenschaften”, Angew. Chem. (2001), 113, 4336-4339.

  • Kaskel, S.; Schlichte, K.: “Porous Silicon Nitride as a Superbase Catalyst”, J. Catal. (2001), 201(2), 270-274.

  • Sauer, J.; Kaskel, S.; Janicke, M.; Schüth, F.: “Zirconia Nanoparticles in Ordered Mesoporous Material SBA-15”, Stud. Surf. Sci. Catal. (2001), 135, 315.

  • 2000

  • Kaskel, S.; Corbett, J. D.: “Synthesis and Structure of K10Tl7: The First Binary Trielide containing Naked Pentagonal Bipyramidal Tl7-Clusters”, Inorg. Chem. (2000), 39(4), 778-782.

  • Kaskel, S.; Corbett, J. D.: “Synthesis, Structure, and Bonding of A5Cd2Tl11, A = Cs, Rb. Naked Pentagonal Antiprismatic Columns Centered by Cadmium”, Inorg. Chem. (2000), 39(14), 3086-3091.

  • Kaskel, S.; Farrusseng, D.; Schlichte, K.: “Synthesis of Mesoporous Silicon Imido Nitride with High Surface Area and Narrow Pore Size Distribution”, Chem. Commun. (Cambridge, U. K.) (2000), (24), 2481-2482.

  • 1998

  • Kaskel, S.; Hohlwein, D.; Strähle, J.: “Study of Ammonolysis Reactions with in situ X-ray Diffraction: Detection and Crystal Structure of Li0.84W1.16N2”, J. Solid State Chem. (1998), 138(1), 154-159.

  • 1997

  • Abram, U.; DellAmico, D. B.; Calderazzo, F.; Kaskel, S.; Labella, L.; Marchetti, F.; Rovai, R.; Strähle, J.: “A New Type of Alumoxane Obtained by Controlled Hydrolysis of N,N-dialkylcarbamato Complexes of Aluminium; Crystal and Molecular Structure of [Al43-O)2(O2CNPri2)8]”, Chem. Commun. (1997), (20), 1941-1942.

  • Kaskel, S.; Strähle, J.: “Synthese und Struktur von Li2Ta2O3F6”, Z. Anorg. Allg. Chem. (1997), 623(83, 456-460.

  • Kaskel, S.; Strähle, J.: “Zur Struktur und Reaktivität des Diammonium- hexafluoromanganates(IV)”, Z. Anorg. Allg. Chem. (1997), 623(8), 1259-1263.


 

Buchbeiträge  (PDF-Version)

     

  • B. Boehringer; R. Fischer; M. R. Lohe; M. Rose; S. Kaskel; P. Kuesgens: “MOF shaping and immobilization”, in Metal-Organic Frameworks, D. Farrusseng (Ed.), (2011), 353-381.

  • S. Kaskel: “Synthesis and Catalytic Properties of Titanium Nitride Nanoparticles”, in Inorganic Chemistry in Focus, G. Meyer, D. Naumann, and L. Wesemann (Ed.), Wiley, VCH, Weinheim, (2006), 279-293.

  • S. Kaskel: “Heterogeneous CH Transformation with Solid Superbases”, in Handbook of C-H Transformations, G. Dyker (Ed.), Wiley, VCH, Weinheim, (2005), 409-416.

  • S. Kaskel: “Porous Metal-Organic Frameworks”, in Handbook of Porous Solids, F. Schüth, K. S. W. Sing, J. Weitkamp (Ed.), Wiley, VCH, Weinheim, (2002), 1190-1249.

  • P. Llewellyn, S. Kaskel: “Miscellaneous Solids”, in Handbook of Porous Solids, F. Schüth, K. S. W. Sing, J. Weitkamp (Ed.), Wiley, VCH, Weinheim, (2002), 2063-2086.

  • Rezensionen

  • S. Kaskel, Nitride Semiconductors – Handbook on Materials and Devices, P. Ruterana, M. Albrecht, J. Neugebauer (Eds.), Wiley-VCH, Weinheim, (2003). 664 p., für Angew. Chem. Int. Ed. 2003, 42, 4724-4725.

  • Enzyklopädien

  • S. Kaskel: „Poröse Materialien ”, Brockhaus, 21. Auflage.


                                                                                                                                                                                               

 
 

AKTUELLES


 

KONTAKT


Sekretariat

Stefanie Richter
Tel.: +49 351 463-33632
Chris Herrmann
Tel.: +49 351 463-35955

Fax: +49 351 463-37287
Email:
sekretariat-ac1(at)mailbox.tu-dresden.de

Sitz:

Bergstaße 66,
Neubau Chemische Institute,
Zi. 462

Post:

TU Dresden
Fachrichtung Chemie
und Lebensmittelchemie

Professur für Anorganische Chemie I

01062 Dresden

Pakete:

Fachrichtung Chemie
und Lebensmittelchemie

Professur für Anorganische Chemie I

Helmholtzstraße 10
01069 Dresden

Webmaster           Letzte Änderung: 06.09.2016 10:06           Impressum